Waveforms not shown during recording

[tamasdragon]

Suddenly I cannot see the waveforms during recording. I'm not in loop or punch or destructive mode, so cannot really understand what happened.
Tamas Dragon

[tamasdragon]

The situation is wierd. One machine with dualboot, identical xp, identical pt. On the a xp waveform are drawn as I record, on the b xp waveforms are not drawn during recording, only after pressing stop. Record mode is normal. How can I solve this?
Tamas Dragon

[mykhal c]

The situation is wierd. One machine with dualboot, identical xp, identical pt. On the a xp waveform are drawn as I record, on the b xp waveforms are not drawn during recording, only after pressing stop. Record mode is normal. How can I solve this?
Tamas Dragon

are all your preferences set up indentically on each system??? how do you have scrolling setup??

[Kirby B.]

I had this happen recently too for the last days I had 7.3.1. It went away after I just went to 7.4cs2, but it was strange as I couldn't check if it was really recording.

[tamasdragon]

Every parameter is identical in the prefs, scrolling is set to page at both profile. Really cannot understand what's happening. Even the plugs are the same.
Tamas Dragon

[Third Eye Studios]

Are you using low latency monitoring? If so try turning it off to see if the waveforms are displayed.

[tamasdragon]

Tried in low latency, tried when it's off, tried with different buffers too, but still no sucess.
I suspect that I should reinstall protools in that system.
Tamas Dragon

[tamasdragon]

Ok, an update. For the record, this machine has 4GB ram, and protoolsle is patched with largeaddressaware. If I remove the patch, everything is working (drawing the waveform during rec), and as soon as I apply the patch, it doesn't draw the waveform.
Now the funny thing is that, at the other profile I patched the file and still draws the waveform during rec. Now I really don't know what can be the solution.
It's not that I cannot live without the patched protools, but now at this point I really want to know what cause this that in profile a everything is fine, and the in profile b (which is identical to a) it causes problem. I checked that the two windows are having the same updated components, even has the same videocard driver, so now I seem to have no idea what can make this thing work in one profile, and make bad in the other.
Still wait for any expert to chime in.
Tamas Dragon