Late/Choppy meters G4-OS9-Mix

[ProTools4]

The meters for any track in record become super latent and choppy. Over a second late and around 1 Frame per second!
This showed up after a complete system reinstall.

Did I miss something in the reinstall?


------------------
Tad Banzuelo
[email protected]

[George Cumbee]

We are running PTMixPlus/ProCon on a 9600/300. I have complained about the meters since upgrading to 5.0 They were bearable in 4.3.1, but in 5.0, I think they are much slower. I just assumed that it went along with other general slowness of 5.0 and/orOS9.

George Cumbee
Classic Recording www.classicrecording.com

[GROS]

hey protools4!

i have a mixplus setup with my G4/450 OS9.haven't noticed the latency in record mode,or playback. just weird crashes.

[DigiTechSupt]

PT4,

Meters look the same in my setups, very responsive and very green. So you probably know what the million dollar question will be.

What is your setup, what kind of computer, what are your monitor settings set to ect.
I'm sure that looking at the basic settings of your newely installed OS9 will expose something that is slowing down the performance of your screen redraws.

B Carter
Digidesign

[George Cumbee]

What about slowness on the ProControl? I swear they are not as fast as they were in OS8.1 & 4.3.1 Almost unusable.

9600/300 OS9 192meg ram.
2 X 18gig Glyph

George

[ProTools4]

GROS,
Hey Mang what up?

Tech Sup.
G4/350/DVD/256ram/SingleAtto/Approved Segate HDD's/MS InteleMouse/SuperSlim Extention Set for PT5.0/256colors/DAE recomended setting/50Mg Max Mem for PT 80Max for DAE.

Ive tried all kinds of memory and Display settings!

Any Ideas?

------------------
Tad Banzuelo
[email protected]

[DigiTechSupt]

Looking into it still -


BC
Digidesign

[ProTools4]

TechSup
Help me out here.

If my clients look at the screen there going to have a cow!

Should I try killing different extentions?
Different Video Rez?
More or less App mem.?
Is there any settings I should check in PT5?

I

------------------
Tad Banzuelo
[email protected]

[Evolution]

Am also finding this problem difficult to work with. In Digital Performer 2.61MTS using DAE it is even worse. Am using Mix + and G4 450 Saw. Also hearing clipping without seeing it om meters in DP and PT 5. Do I need to do some kind of hardware calibration of my interfaces ? Using an 888-24 and 1622. Was hoping to use a HUI and PT instead of a mixing console, now not so sure....am new to Pro Tools and don't know what are limitations and what are things I can change with a bit of knowledge ...would be very grateful for any tips

[ProTools4]

Good thing all my clients are stoned.
They haven't noticed yet. Yet.


------------------
Tad Banzuelo
[email protected]