DB25 to DB25 snake

[Viditte]

I am confused about the input of m 192 into the procontrol. I have a cable with normal tascam pin out arrangement. It is what was reccommended at my dealer. The routing is all wrong. I can't use the procontrol correctly. Where can I find PDF for the pin out. I need a soloution for this. I can get the cable built at a modest price with the right information.

[Viditte]

Dah, the output from 192 to procontrol input is what bugs me. TY

[DigiTechSupt]

Hi
The DB-25 you need is designed for use with
192I/O and Procontrol.One DB25 pin is reversed (so, 1->8, 2->7, 3->6, etc.) to compensate for the reversed pin outs on ProControl.
Its called a DB25-DB25R ProControl DigiSnake, 25'
http://www.digidesign.com/p roducts/prd_overview.cfm?product_id=2586

MJ
Digidesign Tech Support.

[Viditte]

I have db25 breakout snakes to both xlrF and xlrM so I hook them up 1-8, 2-7,3-6, 4-5, 5-4,6-3, 7-2,8-1, and send the audio into the Procontrol audio 2 in. I output using db25-xlrM snake into the M&k powered speakers. I/O 5.1 routing LRLsRsCSub for procontrol. I was hoping everything was now straight forward. Snake channel 1 would be the Left front speaker. This wasn't the case. I'm missing it somplace. I need to show this badboy off in surround. Is the digisnake going to solve this? [img]images/icons/shocked.gif[/img]

[DigiTechSupt]

Yes.
MJ
Digidesign Tech Support.

[Viditte]

I'm up and running in surround. Using signal generater and 5.1 output panned to the diffrent ch. and I am on the fly. The digisnake is a elegant soloution. [img]images/icons/wink.gif[/img]