To control all the send level at the same time

[critictalk]

Hi, if I set the send of all tracks, e.g. to bus 5, can I use a master fader or aux to control the send level of bus 5 for all tracks at the same time?

[JFreak]

Yes, the master faders are controls for mixer i/o points. Bear in mind though that if you clip one of the sends you cannot undo that clip with a master fader. But if none of the individual sends clip but the summing buss does, then you can use master fader to lower the level prior to the summing clip.

This takes a little while to get used to, but I can assure you it's worth its while.