Mix Plus+DSP Farm+Bit 3 Heeeelp

[Luis]

Problem with Mix Plus, DSP Farm & Bit3.
My gear:
G3 333 mhz (grey color).
Bit 3 13 slot expansion chassis
PT Mix Plus (Mix Core+Mix Farm)
DSP Farm
Miro DC-30
Adaptec 3940 UW SCSI acc.
The order:
G3 slot A1: Adaptec 3940 UW
G3 slot B1: MIro DC-30
G3 Slot C1: Host card ( bit 3)

Bit 3 Slot 0: Chassis controller card
Bit 3 Slot 1: Mix Core
Bit 3 Slot 2: Mix Farm
Bit 3 Slot 3: DSP Farm
Bit 3 Slot 13:ATI video card(2°monitor)

The DSP Farm card SN° FF05449

The chip: AMCC
pci matchmaker
55933Q
9609QAD
The problem:
Everything work properly without the
DSP Farm.
When I place it on the Bit 3 and load
the Pro Tools program, the system
"hangs" as soon as it start looking for
the TDM.
According to the info writed on the
card,(see above), I have verified that
the DSP Farm card is correct.
(It don't need to be actualized).
Can samebody help me, please?.
Thank in advance,
Luis

[Techsupt2]

Luis

Your going to need to upgrade the DSP Farm to Rev QC/QE for it to be compatible with MIX cards in a BIT 3 chassis. The number on the DSP farm that's in question is:
AMCC pci matchmaker
>>55933"Q"<<
9609QAD

Please call Digidesign Technical Support for the upgrade at 1 650/842-6699 and thanks for the excellent system documentation.

Brad

[Luis]

Thank you very much, Brad.
I'll upgrade the DSP Farm.
Best regards.
Luis