Avid Pro Audio Community

Avid Pro Audio Community

How to Join & Post  •  Community Terms of Use  •  Help Us Help You

Knowledge Base Search  •  Community Search  •  Learn & Support


Avid Home Page

Go Back   Avid Pro Audio Community > Legacy Products > Pro Tools TDM Systems (Mac)

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01-26-2005, 01:12 PM
Siegfried Meier Siegfried Meier is offline
Member
 
Join Date: Feb 2002
Location: Los Angeles
Posts: 1,576
Default Fader movement after automation written

I'm curious about something. After I've written a bunch of automation, and I try scaling all faders down a touch (because they're getting too hot) using the "all" group, the channels with automation written jump back (obviously). Is there a quick way to have the automation automatically scaled down with my other non-automated fader levels, as opposed to figuring out how much was scaled, and then bringing down each channel? I realize that I could bring the master fader down as well, but I'd rather do it this way for other reasons. Thanks much.

Best regards,
Siegfried Meier
Reply With Quote
  #2  
Old 01-26-2005, 02:16 PM
blairl blairl is offline
Member
 
Join Date: Dec 1998
Posts: 1,086
Default Re: Fader movement after automation written

Sure. Select in the edit window the area you want scaled (length and any or all tracks you want affected). Select ALL in the groups window by clicking to the left of ALL or shift click to the left of the groups you want. Adjust the volume on any of the selected tracks by the amount you want to scale if you have selected ALL tracks, or adjust the volume on one track from each group you have selected. Make sure you are viewing track volume in the edit window. Select Edit>Trim Automation>To Current Parameter (or press shift+command+/).

You may want to leave any AUX tracks untouched if you are using them in a send-return fashion for effects and your sends are post-fader. Also be aware that if you are using AUX tracks for bussing with compressors, the compression threshold will be affected by lowering the volume on the tracks driving the compressor.
Reply With Quote
  #3  
Old 01-26-2005, 03:58 PM
Siegfried Meier Siegfried Meier is offline
Member
 
Join Date: Feb 2002
Location: Los Angeles
Posts: 1,576
Default Re: Fader movement after automation written

Ahhh. But of course. It's been there all these years and I didn't realize how it worked!!!! Thanks so much!

Best regards,
Siegfried Meier
Reply With Quote
  #4  
Old 01-26-2005, 04:01 PM
Siegfried Meier Siegfried Meier is offline
Member
 
Join Date: Feb 2002
Location: Los Angeles
Posts: 1,576
Default Re: Fader movement after automation written

Oh. But the problem is, if a channel is already at the lowest volume at the beginning of a track, that track won't reduce it's volume automation accordingly, because there's a zero level at the beginning. Interesting. Still very useful though! Thanks.

Siegfried
Reply With Quote
  #5  
Old 01-26-2005, 04:36 PM
SessionKat SessionKat is offline
Avid
 
Join Date: Dec 1999
Location: Daly City, CA U.S.A.
Posts: 646
Default Re: Fader movement after automation written

Wouldn't using TRIM automation mode on all grouped faders do the same during a real-time pass?

-tv
__________________
Tim vdB
Avid Audio

"There's a fine line between stupid and clever."
Reply With Quote
  #6  
Old 01-26-2005, 11:55 PM
Andre Knecht Andre Knecht is offline
Member
 
Join Date: Dec 2001
Location: Pasadena, CA
Posts: 2,193
Default Re: Fader movement after automation written

Quote:
Oh. But the problem is, if a channel is already at the lowest volume at the beginning of a track, that track won't reduce it's volume automation accordingly, because there's a zero level at the beginning. Interesting. Still very useful though! Thanks. Siegfried
Actually, if you're reducing levels, automation breakpoints found to be at the lowest possible level (and btw, that would be "-infinite", and not "zero"), won't change at all.

Hope this helps.
__________________
Andre Knecht

We’ll fix it in the shrink-wrap. (Frank Zappa)

.
Reply With Quote
  #7  
Old 01-27-2005, 10:18 AM
frenchman frenchman is offline
Member
 
Join Date: Aug 2003
Location: Rochefort (17) France
Posts: 542
Default Re: Fader movement after automation written

Quote:
Wouldn't using TRIM automation mode on all grouped faders do the same during a real-time pass?
yes and you can use the the write to end feature to apply to whole track
__________________
Mark Haliday
France, Rochefort 17300
Mixing & Mastering, Writer, Teacher
Pro Tools Ultimate & Carbon
M2 Max Studio
Reply With Quote
  #8  
Old 01-27-2005, 05:02 PM
Camilo Orozco's Avatar
Camilo Orozco Camilo Orozco is offline
Member
 
Join Date: Nov 1998
Location: Toluca, Mexico
Posts: 969
Default Re: Fader movement after automation written

Quote:
yes and you can use the the write to end feature to apply to whole track
How do you "write to end"???
__________________
Camilo Orozco
Like us on www.facebook.com/artedigitalestudio
www.estudiodegrabacion.com.mx
Reply With Quote
  #9  
Old 01-27-2005, 06:24 PM
Rail Jon Rogut Rail Jon Rogut is offline
Member
 
Join Date: Dec 1969
Location: Los Angeles, CA, USA
Posts: 14,492
Default Re: Fader movement after automation written

Command+4 brings up the Automation Window.

Page 499 of the 6.7 Reference Guide.

Control (under Mac, Start under XP) clicking on either the GTZ or GTE buttons in the Transport Window also can be used to write to the Start or End.

Rail
__________________
Platinum Samples
www.platinumsamples.com
Engineered Drums for BFD
••••••••••••••••••••••••••••
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
extra automation written viaspiaggia Post - Surround - Video 4 06-14-2013 12:28 PM
Where is the Disable Fader Movement...feature? The Missile Silo ICON & C|24 3 12-22-2010 07:48 AM
Control 24 - fader mm movement IntelDoc ICON & C|24 8 07-02-2009 11:06 AM
"No automation could be written.... dkroger ICON & C|24 4 12-19-2005 08:43 AM
strange fader movement when recording midi forthecause ProControl, Control|24, Command|8 1 12-18-2004 08:07 PM


All times are GMT -7. The time now is 10:58 PM.


Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com