Apogee AD16X 192 help Apogee not seen in hardware manager

[assemblyworker]

Hi there,

I've just updated to 7.3 from 6.9.1 and have lost all trace of the Apogee converter. There is no sign in the hardware set up. It used to appear as a second 192.

I've searched the main site and here for info with no joy.

Any help would be greatly appreciated.


System:

Duel 2GHz G5
OSX 10.4.6
2.5 Gb RAM
PT 7.3 cs1

Many thanks.

[Rezman]

Your X-HD card will need a firmware update to be seen by PT7.x.
http://www.apogeedigital.com/downloa...?show=xhd_card

[assemblyworker]

Ahh I was hoping you wouldn't say that!

When we first purchased the unit (some 2 years ago) the firmware was out of date. After following the instructions to the letter using a MOTU MIDI Express 128 and several unsuccessful attempts the unit had to be sent back to Apogee for repair.

I'm not sure if there was a compatability issue with the MOTU. Has anyone had experience of updated via this interface? I don't want to lock the unit up (not that I can use it anyway).

I can't remember what Apogee repaired back then or weather they just updated the firmware there. Looks like I'll have to make some calls before I jump in with this one unless anyone else can shed some light of this...

Thanks for the reply.


T.A.W.

[assemblyworker]

Ok.... Made sure I've got all the latest drivers and read all the info.

Anyone else able to chip in before I jump in at the deep end?


Cheers.

[assemblyworker]

Ok.... Made sure I've got all the latest drivers and read all the info.

Anyone else able to chip in before I jump in at the deep end?


Cheers.