|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
Older Expansion Chassis Compatibility question.
I have an older 7 slot Digidesign Branded SBS Chassis and want to know if it can be used with an HD core and Process card and a G5. It is obviously an PCI chassis with a Model # MH477 and a Part # 85466201. I am not sure if this is 32 or 64 bit. But before I connect it I want to know if it is compatible with this setup. I intend to run 7.4 and 10.4.9 OS.
The info I have managed to dredge up makes this far from clear to me. Any help would be appreciated. Thanks in advance. Simon L. |
#2
|
||||
|
||||
Re: Older Expansion Chassis Compatibility question.
That would be a 32-bit chassis:
http://www.digidesign.com/index.cfm?...4&itemid=23351 The Digidesign & SBS (Bit3) 7 Slot 32-Bit Expansion Chassis are officially qualified for use with Pro Tools|HD and Pro Tools|HD Accel PCI card systems with Pro Tools HD 7.0, 7.1, and 7.2 for Mac OS X. Not tested or qualified with Pro Tools 7.3 and higher, so I can't tell you whether it would work with 7.4. Not something that we have tested.
__________________
Administrator Avid Pro Audio Community |
#3
|
|||
|
|||
Re: Older Expansion Chassis Compatibility question.
Thank you for the reply. As long as I know it will function without damaging the cards I will give it a try and see what happens. This will allow us to use an HD3 with a SCSI card otherwise we cannot use our SCSI drives on this system in the mix room.
best regards Simon L. |
#4
|
|||
|
|||
Performance issues with 32 bit chassis
What is the performance difference between a 32 7 slot chassis and a 64 bit chassis running HD3 Accel on a dual 2.7 G5 PT 7.4?
__________________
8 Core Harpertown 3.0 Apogee Symphony 64 / Rossetta 800 |
#5
|
|||
|
|||
Hi All
Do you know this box ? http://virtuavia.eu/shop/pci-express...nsion-box.html I got a home studio at my home and I bought a Protools HD Core card was so cheap . I got a PPC G5 at home but not PCI ! its pCIe (the slots) I have searched the pci-express-to-pci-expansion-box I fond Magma but I would like to buy cheaper. Anyway what do you think about to this box and I don't know it's compatible with protools HD core PCI cards? Thanks |
#6
|
|||
|
|||
Bump bump bump
|
#7
|
|||
|
|||
Can someone can help me?
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Older Expansion Chassis Compatibility Question | johnliquid | Pro Tools TDM Systems (Win) | 0 | 06-14-2012 12:38 PM |
Expansion chassis compatibility? | Armando | Pro Tools TDM Systems (Mac) | 2 | 12-18-2011 01:07 AM |
Older mac pro w expansion chassis HD7 system vs 12 core mac pro & HD3 | smokeydan | Pro Tools TDM Systems (Mac) | 9 | 08-01-2011 08:15 PM |
Older Expansion Chassis | HD2 | Pro Tools TDM Systems (Mac) | 1 | 12-29-2010 09:28 PM |
New expansion chassis. Compatibility tests? | Ang1970 | General Discussion | 1 | 01-16-2001 12:12 AM |