Latency on Auxes

[ameyerson]

So, I can't figure out if I'm a dummy or not. When I'm mixing if I want to blend a, say, compressor on my drums and send to it from an aux I have latency no matter what is going on with ADC. What am I missing here?

[YYR123]

Any less info, you could give?

For all I know your running PT7.4 on a G5 Mac with an DIGI01 as your interface....

Then again you could be running PT 12 on a trashcan pro using native soundcard....point is I just don't know

Even though you posted in PT11 forum

[ameyerson]

Sorry. I'm running PT 11. I've tried this on all of my rigs. I have about 5 different rigs all towers of various variety.

[YYR123]

Isn't adc defeated if your running in LLM?

All plugs on the aux's or only just a few plugs causing issues

[ameyerson]

Any plug I use on the a

[ameyerson]

Any plug I use on the aux does it.

[Stig Eliassen]

How do you route signal to the aux? All ADC numbers in the green, besides one orange? Can you post a screenshot of the mix window that shows routing and ADC numbers clearly?

[YYR123]

Sorry Amyerson I was watching the studio one live cast for the release of the new version

[ameyerson]

Originally Posted by PT Lover

How do you route signal to the aux? All ADC numbers in the green, besides one orange? Can you post a screenshot of the mix window that shows routing and ADC numbers clearly?

Standard way. Create a buss, Create a send, create an Aux track, send to the Aux track, try to mix in the aux Track, results in latency/combing. It actually occurs whether or not I have a plugin on the Aux track which leads me to believe that ADC doesn't work on aux returns properly.

[YYR123]

LLM is on or off? Adc is on or off? (You can turn it off and on a per channel basis)

Delay comp is set to? Short Medium or Long?