S3L power requirement specs?

[mattrussell]

i looked at the avid site in detail, but i couldn't find specs on the power requirements for any of the S3L components. does anyone here have one they could take a look and copy them down for me (or maybe an avid person could chime in)? i need them for all three pieces and i've reached out to avid via the dealer we just ordered two of these consoles from (that i believe just shipped), but they haven't heard back. maybe our two consoles will show up today and i can just look at the boxes, but i doubt i'll be that lucky.

we need to supply this information to an electrician that's doing a feasibility study on a space where we'll hopefully be installing an S3L later this year. i need the info today if possible.

thanks,

matt

[Sheldon Radford]

Hi Matt,

We'll be updating the website soon with this info. Conservative maximum figures are:

E3 Engine = 95 W
Stage 16 = 60W
S3 Control Surface = 45W

Final published spec may vary slightly, but likely not by much.

Shedon

[mattrussell]

this helps - thanks!

m

[Greg C]

Originally Posted by Sheldon Radford

Hi Matt,

We'll be updating the website soon with this info. Conservative maximum figures are:

E3 Engine = 95 W
Stage 16 = 60W
S3 Control Surface = 45W

So for a setup with two stage boxes, you're looking at 260W which is a whopping 2.2 amps of draw at 120V or 1.1 amps at 240V. You might be able to power that setup with a generator attached to a hamster wheel