192 with Pro Tools 2021?

[Defekt]

Hello,
I know that the 192’s official status with the latest versions of pro tools is “untested”, but I'm willing to bet there are users here who have tested it. Was thinking about picking up a used 192 on eBay as a secondary interface to my Omni for additional outputs to experiment with some analog summing. They are relatively inexpensive these days. Has anybody had luck using a 192 with pro tools 2021 with hd native thunderbolt? Thanks in advance!

[Rich Breen]

Not native, but on an HDX rig I have a 192 digital that works fine.

[arche3]

Pretty sure it's fine.

Sent from my SM-F711U using Tapatalk

[albee1952]

192 working fine here on Windows 10 with HDN card and 2021.12. Its a great budget option for sure. Just remember a few things:
1-a 192 DIGITAL(says DIGITAL on the front panel) CANNOT take any analog cards
2-a 192 chassis MUST have a digital card in slot 3 or it won't work at all
3-if you need to run unbalanced(in or out), do NOT ground the cold connection or you can damage the unit(its not hard to make custom cables, which will work fine; voice of experience here)

[itsjustmeee123]

I’m using PT Native with a 192. Works great. No issues for close two 2 years now.

[originalscottyg]

I'm on PT|U 2021.7 on a MacBook Pro with HD Native TB and Omni + 192. Working great!

[lae777]

I'm using a Native card, not Thunderbolt, but no issues at all.