Best foot controller for use with Eleven Rack?

[CoiLive]

Well, I do see a need for more fx. Even only for some pitch shifting (mostly and octave down for me), an extra distortion (from crunch to more extreme overdrives) and an extra delay for some more spacey effects.

I'll take the mere 2ms for granted.

Especially when you can use the HD500 as a backup and even as a handy 2 go guy for when I don't want to take my big 11R Rack and unplug all the cables etc. :)

I think I'll be selling my FC300 and buy a nice HD500 for this one :)

[Deny]

Originally Posted by CoiLive

Well, I do see a need for more fx. Even only for some pitch shifting (mostly and octave down for me), an extra distortion (from crunch to more extreme overdrives) and an extra delay for some more spacey effects.

I'll take the mere 2ms for granted.

Especially when you can use the HD500 as a backup and even as a handy 2 go guy for when I don't want to take my big 11R Rack and unplug all the cables etc. :)

I think I'll be selling my FC300 and buy a nice HD500 for this one :)

Cool, in that case you might want to take a look at the tutorial I've written at TGP for getting the two units working together:

http://www.thegearpage.net/board/sho...d.php?t=877456

[electricfiddle]

So is the "Ground Control Pro" the unit you "can't go wrong" with?

[Benoni]

Originally Posted by electricfiddle

So is the "Ground Control Pro" the unit you "can't go wrong" with?

It matters what you want to do. And what form factor do you like.

Another option is to get an FCB1010 and the EurekaProm from Eureka Sound.

www.eurekasound.com

[richpjr]

Originally Posted by electricfiddle

So is the "Ground Control Pro" the unit you "can't go wrong" with?

I am using the GCP and it works very well the the 11R with little messing around.

[Kruegmeister]

I am using the Behringer FCB1010 Stock (No Special PROM)
It works great but you have to do your programming on the Foot Controller.
I am in Bank Mode so I can have a Bank with 10 Presets, this is the way I prefer as opposed to Stomp Box Mode (I think it can do that too)

For Midi Patch A1 is 1, B1 is 5, etc... I have them listed in this Spreadsheet I made.
http://www.intecautomated.com/blindi...yBankv2_01.xls

The Biggest Two Procedures:
Preset Mapping - Which Program comes up when you press button.
You have to Select the Bank with the Bank Up Down and then Select a Preset 1-10 (It should be lit up)
1) Press and Hold Down Button (2.5 sec)
2) Press Up to Confirm
3) Press 1 Button (Always 1, you selected the preset prior to Holding down)
4) Press Up to Confirm
5) Enter Patch to Recall (M4 would be 52, press 5 then 2)
6) Press Up to Confirm
7) Press and Hold Down Button to Save (2.5 sec)

Footpedal Mapping - Continuous Control of Parameters
You have to Select the Bank with the Bank Up Down and then Select a Preset 1-10 (It should be lit up)
1) Press and Hold Down Button (2.5 sec)
2) Press Up to Confirm
3) Press 8 or 9 Button (8 is Left Pedal)
4) Press Up to Confirm
5) Enter CC Number (11 is MultiFX, 4 Wah, Volume 7)
6) Press Up to Confirm
7) Enter Minimum (0-127, 0 is OFF and 127 Full Volume)
8) Enter Maximum (0-127, 0 is OFF and 127 Full Volume)
9) Press and Hold Down Button to Save (2.5 sec)

You can also send A Toggle upon loading each preset.
For instance I setup a Tuner Patch on Bank 5 preset 5
1) Press and Hold Down Button (2.5 sec)
2) Press Up to Confirm
3) Press 6 Button
4) Press Up to Confirm
5) Enter CC to send (Tuner is 69, press 6 then 9) (0 to turn off)
6) Press Up to Confirm
7) Enter Minimum (0)
8) Enter Maximum (127)
9) Press and Hold Down Button to Save (2.5 sec)

[Righty27]

http://www.rocktron.com/products/con...rs/midiraider/

[SloeGin]

Originally Posted by Righty27

http://www.rocktron.com/products/con...rs/midiraider/

seems interesting. How much is it?
can't seem to find a price anywhere online ...

[Righty27]

I understand it's just been announced.

[UG99999]

The standard prom for Behreinger FCB 1010 does nearly anything that the other proms do.

See here for a sysex file and explanation:
http://duc.avid.com/showthread.php?t...hringer&page=2