midi timing erratic even with click on LE 7.3

[Greg F]

Hi all,

If I open a brand new session, then create a click track, the timing is all over the place..not a subtle issue, but brutally off.

Playing back audio works fine.

1. I am running XP with SP3 on a Core 2 duo based machine. SO this means I have the dual core hot fixes mentioned on the digidesign site...so no that doesn't help.

2. I have down loaded the latest 7.3.1 etc version.

3. I have trashed my preferences.

Any other suggestions?

Greg

[Banana]

I noticed something here the other day, which is probably unrelated to your particular problem.

When I imported a midi file into my fresh session, the timing was all over the place. If I added the midi by drag and drop, it worked fine.

[Jenk2k]

I had this problem before. You need to be at a low buffer. Im sure you are though. The problem in my case was related to using mismatched RAM. All sticks must be same size and same speed. I had 2.5gb in mine. The minute i took the 512 stick out problem solved. immediately.

[Greg F]

Have tried different buffer settings....no joy....
RAM is new and matching (PC is new)...no joy...

Any other thoughts?

[DigiTechSupt]

Originally Posted by Greg F

Have tried different buffer settings....no joy....
RAM is new and matching (PC is new)...no joy...

Any other thoughts?

Have you tried all the other suggestions in the General Troubleshooting thread yet?

[Greg F]

Hi DIGI Support....

I am now desperate...

I have:

1. All suggestions on the trouble shooting (twice)
2. Loaded latest bios etc
3. Uninstalled protools and all plugins
4. Reinstalled protools 7.3 le with no extra plugins
5. Opened a new session, and loaded the click track
6. A one bar loop with only the click track jumps and stutters dramatically
   
   Sandra list is below. I am at the point of contamplating getting new motherboard etc ???
   
   Note that I can load a large and complicated audio session with lots of plugins and automation and it runs just fine...this is just a midi timing problem.
   
   Again, I am desperate for suggestions as at the moment I can't work.
   
   Sandra List:
   
   Windows XP SP3, Protools LE 7.3, MBOX 2
   
   
   Processor
   Model : Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz
   Speed : 3.17GHz
   Cores per Processor : 2 Unit(s)
   Threads per Core : 1 Unit(s)
   Type : Dual-Core
   Integrated Data Cache : 2x 32kB, Synchronous, Write-Thru, 8-way, 64 byte line size
   L2 On-board Cache : 6MB, ECC, Synchronous, ATC, 24-way, 64 byte line size, 2 threads sharing
   
   System
   Platform Compliance : Intel vPro
   Mainboard : Intel Corporation DG45ID
   BIOS : Intel Corp. IDG4510H.86A.0077.2008.0725.1734 (07/25/2008)
   Bus(es) : X-Bus PCI PCIe IMB USB FireWire/1394 i2c/SMBus
   Multi-Processor (MP) Support : No
   Multi-Processor Advanced PIC (APIC) : Yes
   Total Memory : 3GB DIMM DDR2
   
   Chipset
   Model : Intel P45/P43/G45/G43 DRAM Controller
   Front Side Bus Speed : 4x 333MHz (1.33GHz)
   Total Memory : 4GB DIMM DDR2
   Memory Bus Speed : 2x 400MHz (800MHz)
   
   Memory Module(s)
   Memory Module : Kingston 2G-UDIMM 2GB DIMM DDR2 PC2-6400U DDR2-800 (5-5-5-18 3-23-6-3)
   Memory Module : Kingston 2G-UDIMM 2GB DIMM DDR2 PC2-6400U DDR2-800 (5-5-5-18 3-23-6-3)
   
   Video System
   Adapter : NVIDIA GeForce 8400 GS (16 SP 1.4GHz, 512MB DDR2 2x400MHz, PCIe 2.00 x16)
   
   Graphics Processor
   Adapter : NVIDIA GeForce 8400 GS (128SP 1.4GHz, 512MB 2x400MHz Integrated Graphics)
   
   Storage Devices
   WDC WD5001AALS-00L3B2 (500.1GB, SATA300, 3.5", 7200rpm, NCQ, 32MB Cache) : 466GB (C:) (D:)
   
   Logical Storage Devices
   Hard Disk (C:) : 77GB (NTFS) @ WDC WD5001AALS-00L3B2 (500.1GB, SATA300, 3.5", 7200rpm, NCQ, 32MB Cache)
   Hard Disk (D:) : 368GB (NTFS) @ WDC WD5001AALS-00L3B2 (500.1GB, SATA300, 3.5", 7200rpm, NCQ, 32MB Cache)
   V702 (E:) : 508MB (CDFS)
   
   Peripherals
   LPC Hub Controller 1 : Intel LPC Interface Controller
   LPC Legacy Controller 1 : T0 F1-01h
   Audio Device : Intel HD Audio Controller
   Serial Port(s) : 1
   Disk Controller : Intel 4 port SATA IDE Controller
   Disk Controller : Intel 2 port SATA IDE Controller
   USB Controller 1 : Intel USB UHCI Controller #4
   USB Controller 2 : Intel USB UHCI Controller #5
   USB Controller 3 : Intel USB UHCI Controller #6
   USB Controller 4 : Intel USB EHCI Controller #2
   USB Controller 5 : Intel USB UHCI Controller #1
   USB Controller 6 : Intel USB UHCI Controller #2
   USB Controller 7 : Intel USB UHCI Controller #3
   USB Controller 8 : Intel USB EHCI Controller #1
   FireWire/1394 Controller 1 : Intel FW322/323 IEEE1394 OHCI FireWire Controller
   SMBus/i2c Controller 1 : Intel 801xx/63xx SMBus
   
   Network Services
   
   Power Management
   Mains (AC) Line Status : On-Line
   
   Operating System
   Windows System : Microsoft Windows XP Home 5.01.2600 (Service Pack 3)
   Platform Compliance : x86