Avid Pro Audio Community

Avid Pro Audio Community

How to Join & Post  •  Community Terms of Use  •  Help Us Help You

Knowledge Base Search  •  Community Search  •  Learn & Support


Avid Home Page

Go Back   Avid Pro Audio Community > Legacy Products > 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win)

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 02-01-2002, 11:19 AM
pickin pickin is offline
Member
 
Join Date: Jul 2001
Posts: 3
Default How do I best use my Mackie 1604 VLZ pro mixer?

I'm wondering what the best way to use my Mackie 1604 VLZ-Pro mixer. I just got it and my thoughts are to send digi001 outputs to the mixer "tape in" and route this signal to my Control Room outs feeding my reference monitors. This way, I'll never have to worry about latency while tracking. I use the tape-ins because there is nothing in the path except the volume pot. But, My question is by going to the RCA plug (Tape-in) conversion am I loosing some sonic quality? Also is there a better way to route digi001 monitoring through the mixer without altering the audio from digi001 outs? If someone has a better solution please let me know.

Thanks
Reply With Quote
  #2  
Old 02-01-2002, 06:56 PM
stickstome2 stickstome2 is offline
Member
 
Join Date: Jan 2001
Location: owensboro, ky
Posts: 281
Default Re: How do I best use my Mackie 1604 VLZ pro mixer?

What I would is, since 1-8 on the 1604 has direct outs use these to go from 1 to 1 on the digi001 input and so on exp, direct out of # 1 on mackie to in put on 001 # 1 then thru all 8. 2 to 2 3 to 3 4 to 4----then route the main outs from the 001 to the inputs 9 and 10 on the mackie..send only those to subs one and two with correct panning--9 is panned left and ten is panned right---sub 1 is panned left and sub 2 is panned right---if you have a headphone amp the send the 9 and 10 digi inputs to subs three and four to control head fons---do not assign the first inputs ( direct outs ) to any sub because they are already going to the digi and will be heard back through 9 and 10--hope this helps.
thanks
Stix
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Splitting Gtr signal with Mackie 1604 mixer Ping Pong 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) 5 07-02-2007 07:04 AM
Mackie 1604-VLZ Pro LC13 Tips & Tricks 2 08-11-2005 08:39 PM
Mackie 1604 VLZ Pro toofly4asoundguy 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 3 12-05-2004 10:19 PM
mackie 1604 vlz pro to extend I/O on 002? blind iris General Discussion 2 11-30-2003 08:02 AM
Keep my Mackie 1604 or..... toecat 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) 3 08-06-2000 07:14 PM


All times are GMT -7. The time now is 11:21 PM.


Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com