Avid Pro Audio Community

Avid Pro Audio Community

How to Join & Post  •  Community Terms of Use  •  Help Us Help You

Knowledge Base Search  •  Community Search  •  Learn & Support


Avid Home Page

Go Back   Avid Pro Audio Community > Legacy Products > Pro Tools TDM Systems (Mac)

Reply
 
Thread Tools Search this Thread Display Modes
  #11  
Old 08-03-2006, 05:50 AM
stonedef stonedef is offline
Member
 
Join Date: Jul 2004
Location: australia
Posts: 17
Default Re: LE and HD on the same machine

i wonder if the diff is that being a laptop, theres no cards instaled internally.

On my G5 i start from the dock icon as you say, with the 192 turned off just the 002 console on, but it always comes up with this message "you need to choose the Audio Interface(s) you're using with your Digidesign system. Click OK to proceed to the Hardware Setup dialog"

So by clicking OK i get to "Unable to find an Audio Interface attached to the first HD card. Please check power, Digilink cables and that a peripheral is connected to the firat card"
The two boxes are "quit" or "re-scan"

Of course rescanning finds nothing unless you power up the 192, quitting exits the launch.
If you do power up the 192 and then go to the hardware setup it selects the 192 as the interfce and the 002 for SPDIF and you can't change anything.
i was told today that you can apparently disable PCI slots in the OSX partition but dont know how to do that. That could work by disabling them only from my LE partition

Still exploring.........................
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
New Machine? New Hardware? Purpose built Machine? PatriotsBiker Windows 4 06-29-2013 11:06 PM
New machine with XP Pro? the_dr38 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) 7 06-18-2008 02:56 AM
DAT MACHINE? Stavros Digidesign Hardware & Software 0 05-13-2001 05:11 PM
PT 5 and 4.3 on same machine ? cpuram Pro Tools TDM Systems (Mac) 5 02-03-2000 11:47 AM
Machine Control's supported machine J. S. Bach General Discussion 0 01-17-2000 07:06 AM


All times are GMT -7. The time now is 10:37 AM.


Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com