Eucon 3.1 bug with McMix: Shift-Fader doesn't work

[DhyanMikael]

Since upgrading Eucon 3.01 to Eucon 3.1, with my Artist McMix, the Control-Fader function is broken.

When I press shift and touch a fader, the corresponding fader in my DAW jumps to 0 dB, but the hardware fader on the McMix remains at the old position. So Hardware fader and DAW fader are out of sync.

Sometimes, the Hardware fader actually does move to 0 dB, but only rarely, and I can't do it on purpose with 3.01, it worked as expected always.

I upgraded Firmware of McMix to latest version, but no Change to the problem.

I checked the Shift-fader Setting in the Eucon Software, unchecked it, checked it again, no change.

Is Shift-fader working for anyone with Artist McMix and Eucon 3.1?

Regards,
Mikael

[ALSTUDIOS]

Originally Posted by DhyanMikael

Since upgrading Eucon 3.01 to Eucon 3.1, with my Artist McMix, the Control-Fader function is broken.

When I press shift and touch a fader, the corresponding fader in my DAW jumps to 0 dB, but the hardware fader on the McMix remains at the old position. So Hardware fader and DAW fader are out of sync.

Hi

Same with my gear

Downgraded to v. 2.7.1 and as well to the related Firmware 1.5.1.
==>> all is fine with me


Really wait for a further update of the v 3.1 Driver.


Cheers

[Fokke van Saane]

Bug logged at beta board.

[ALSTUDIOS]

Originally Posted by Fokke van Saane

Bug logged at beta board.

Hi

"Beta board" ??
Where could this be find??


Cheers