|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
Receiving MIDI commands from sequencer
I apologize if this question has been asked before, but I didn't find it when I looked: I have been having trouble getting my Eleven Rack to respond to midi programs sent by a computer sequencer. I have been using this method for various devices for years, but this has some unique issues.
I'm only asking it to switch between a "rig" that uses distortion and a "rig" that is a clean sound (in most cases). When it switches to a distortion rig from a clean rig it does one of two things: it switches off the volume control, and I need to reactive it by bringing the toe down to zero (there is not always enough time for this in the song, but why settle for this anyway?), or it shifts the change to a later part of the song (which leads me to believe that the Eleven has a slower response time than a Pod, and even something from the '80 that I used to use). I can manually shift the positions, but I'm more concerned about the problem where the volume goes off. The source of the problem has been narrowed down to the Eleven, and not any other part of the setup. But, what is it in the Eleven? |
#2
|
|||
|
|||
Re: Receiving MIDI commands from sequencer
What kind of delays are you talking about? Milliseconds? Seconds?
As far as the volume issue goes, was the patch saved with the volume set to zero? Try setting the "persistent volume pedal" option; that may help in your situation. |
#3
|
|||
|
|||
Re: Receiving MIDI commands from sequencer
They are 16th note delays (or 120 ticks). So depending on the tempo of the particular song, it could be more milliseconds or fewer.
I won't have access to my Eleven again until Wednesday, but I'll check the volume setting of the patch -that would be great if that is the solution. Where is the "persistent volume pedal" control? I don't remember seeing that. |
#4
|
|||
|
|||
Re: Receiving MIDI commands from sequencer
|
#5
|
|||
|
|||
Re: Receiving MIDI commands from sequencer
Thanks! I'll get back to you after I get to try your suggestions.
|
#6
|
|||
|
|||
Re: Receiving MIDI commands from sequencer
Persistent Volume did the trick! Thanks!
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Protools not receiving MIDI IN | CLASS-A-DUDI TAMIR | Windows | 10 | 03-29-2013 09:21 AM |
PT stopped receiving MIDI | kgrind11 | MIDI | 1 | 08-06-2008 11:34 AM |
Project Mix not receiving Midi | mistermyte | Pro Tools M-Powered (Mac) | 1 | 03-02-2007 02:39 PM |
Midi not receiving data | raj | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 1 | 04-12-2001 06:03 AM |
Transfering note data from a sequencer to the sequencer of the digi 001 sequencer? | MichaelK | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 3 | 11-05-2000 12:29 AM |