|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
|
#1
|
|||
|
|||
Profire 2626 DSP Mixer buffer is locked on 64 Bits
It's locked on 64 bits, and won't let me raise it. A-audio support has been very much useless. I'm getting clicks and pops and dropouts in audio. I've gone through all of the "knowledge base" stuff and no joy. It just won't adjust the buffer once ptmp is opened, and if I change it before opening PT, it just reverts to 64.
anyone here have a solution? I'm running XP home CS3 dual 2.4ghz intel 4gig ram TI fire wire running the default computer soundcard rather than the profire has helped a little bit, but not enough. |
#2
|
||||
|
||||
Re: Profire 2626 DSP Mixer buffer is locked on 64 Bits
Most likely you have the M-Audio device selected in your Sounds and Audio Devices panel - you need to deselect it there and you should be able to change the buffer size.
|
#3
|
|||
|
|||
Re: Profire 2626 DSP Mixer buffer is locked on 64 Bits
I changed it back from the Profire to the onboard sound card in the computer, but it's still locked on 64. Not really sure what to do now. I'm thinking that I'm going to downgrade to 8.0 rather than 8.0.3. This all started when I upgraded.
|
#4
|
|||
|
|||
Re: Profire 2626 DSP Mixer buffer is locked on 64 Bits
I'm getting the same problem. I change everything in the windows control panel as well. I can change it to 64, 128, 256, etc.... in the 2626 no problem but once Pro Tools starts up it changes it back to 64 no matter what.
__________________
www.shrapnelsoundstudio.com |
#5
|
||||
|
||||
Re: Profire 2626 DSP Mixer buffer is locked on 64 Bits
Wait, just to be sure we're all on the same page - once you open Pro Tools, are you trying to change it in the M-Audio panel or in the Pro Tools Playback Engine?
|
#6
|
|||
|
|||
Re: Profire 2626 DSP Mixer buffer is locked on 64 Bits
I change it in the Pro Tools playback engine. It doesn't lock out that option, I was just noticing that it changes and locks the Profire 2626 at 64 once the DAE loads. In Pro Tools its fine, but shouldn't the control panel in the 2626 change with what Pro Tools shows it as? In Ableton and anything else it does. (Example, put it on 128 in PT shouldnt the 2626 Control Panel change to 128? Why does the control panel lock at 64)Did I just make that confusing or does that make sense? lol
__________________
www.shrapnelsoundstudio.com |
#7
|
|||
|
|||
Re: Profire 2626 DSP Mixer buffer is locked on 64 Bits
with pro tools closed, I change it in the DSP mixer, then when PT opens, it goes right back to 64, regardless of what the buffer size (playback engine) is in PT.
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Issues with H/W buffer size, using Profire 2626 and PT10 HELP! | DavidNichols | Pro Tools 10 | 3 | 01-02-2012 11:50 AM |
Profire 2626 and DSP-Mixer | Beerweasle | Pro Tools 9 | 10 | 01-19-2011 10:40 PM |
Help. Profire 2626 H/W buffer size no lower then 128? | Venture Studios | Pro Tools 9 | 12 | 12-23-2010 09:49 AM |
Profire 2626 buffer size - any less than 256? | risemymuffins | Pro Tools M-Powered (Win) | 2 | 10-05-2010 08:58 PM |
Problem Solved--Profire 2626 DSP Mixer buffer is locked on 64 Bits | ubrnostrum | Pro Tools M-Powered (Win) | 1 | 04-20-2010 12:36 PM |