Profire 2626 and Protools 7.4cs4

[tash]

A page from M-Audio knowledge base reads:

Knowledge Base

Max I/O with Pro Tools M-Powered



Q: Will the ProFire Lightbridge or ProFire 2626 let me record with more than 18 simultaneous I/O in Pro Tools M-Powered?

A: No. While both devices are capable of more than 18 simultaneous channels of I/O, Pro Tools M-Powered is limited to a maximum of 18 simultaneous channels of audio I/O. On Windows systems, Pro Tools will display all inputs and outputs regardless of each port’s status, but any audio received on inactive input ports will be ignored. This is normal behavior for this device on this platform due to the way Windows currently handles enabling and disabling of audio channels.

They ain't ready to give up HD system and move to native systems only yet.

[MDog]

They ain't ready to give up HD system and move to native systems only yet.

I had a feeling it was too good to be true. Thanks for the accurate info.

[amj665]

hi all

i have the Profire 2626 put i get problem !

when i run the pt i get this massege

"unable to locate M-Audio hardware Macke sure your hardware is connected and turned on"

the 2626 is turned on and connected

please let me run it and what i can do

i remain