|
Avid Pro Audio CommunityHow to Join & Post Community Terms of Use Help Us Help YouKnowledge Base Search Community Search Learn & Support |
#11
|
|||
|
|||
Re: Q regarding how to connect TC Clarity M
Quote:
"Optical In Format (Detected) Pro Tools | Carbon automatically detects the digital format of the incoming signal on optical ports 1 and 2.(labeled ADAT In 1 and 2 on the back panel). The detected format is displayed for each port: ADAT, S/PDIF, or N/A. Optical Out Format Pro Tools | Carbon provides two pairs of optical in and out ports (labeled ADAT Out 1 and 2 on the back panel). The Optical I/O page of the Hardware Setup lets you set the digital format of each output port to either ADAT or Optical S/PDIF. When set to ADAT, each port provides up to 8 channels of digital audio depending on the sample rate. When set to Optical S/PDIF, each port provides up to 2 channels of digital audio up to 96 kHz." |
#12
|
||||
|
||||
Re: Q regarding how to connect TC Clarity M
Yes, but without having a Carbon here, I am interested in this very important detail: IS IT POSSIBLE to output SPDIF optical outside of PT software or is it PT only?
__________________
Janne What we do in life, echoes in eternity. |
#13
|
||||
|
||||
Re: Q regarding how to connect TC Clarity M
Yes, outside of PT as well. PT Hardware Setup just allows you to select which format you want for the optical output ports.
__________________
Kyle Splittgerber Senior Principal Product Designer Avid Berkeley, CA |
#14
|
||||
|
||||
Re: Q regarding how to connect TC Clarity M
So this works even if you use another DAW?
__________________
Janne What we do in life, echoes in eternity. |
#15
|
||||
|
||||
Re: Q regarding how to connect TC Clarity M
__________________
Kyle Splittgerber Senior Principal Product Designer Avid Berkeley, CA |
#16
|
|||
|
|||
Re: Q regarding how to connect TC Clarity M
Quote:
|
#17
|
||||
|
||||
Can anyone do a step by step on using the optical as adat
Been trying to get our two TC Clarity M stereo units working now when the Optical ports on Carbon is supposed to work as adat/spdif and I connected one optican from the TC to Carbon optical port and I dont know where to change the settings in the software and or PTultimate as I cant get the TC to get a connection green light. Been called by support but as time difference seem to be 9 hrs we were in the middle of tracking so my phone wasnt even on so I really understand why people get green in their face grying to get and help with a 4000 dollar interface and mind you we bought 2 Carbon and with conversion it is about 9700-10.000 USD for both so please can eddie or someone else who knows this help please!? Been helping you (Avid) for 8-9 years so Think I am entitled to 5 minutes of your time?
__________________
Best Regards Christopher #thestruggleisreal South Side Music Group WEBHOME |
#18
|
||||
|
||||
Re: Q regarding how to connect TC Clarity M
Quote:
Thanks Removed my older thread as it didn’t work with the old version but should be working now with new Carbon Firmware and PT2021.10 Here is the new post I wrote today and this shouldn’t be sooo difficult! Been trying to get our two TC Clarity M stereo units working now when the Optical ports on Carbon is supposed to work as adat/spdif and I connected one optican from the TC to Carbon optical port and I dont know where to change the settings in the software and or PTultimate as I cant get the TC to get a connection green light. Been called by support but as time difference seem to be 9 hrs we were in the middle of tracking so my phone wasn’t even on so I really understand why people get green in their face grying to get and help with a 4000 dollar interface and mind you we bought 2 Carbon and with conversion it is about 9700-10.000 USD for both so please can eddie or someone else who knows this help please!? Been helping you (Avid) for 8-9 years so Think I am entitled to 5 minutes of your time?
__________________
Best Regards Christopher #thestruggleisreal South Side Music Group WEBHOME |
#19
|
|||
|
|||
Re: Can anyone do a step by step on using the optical as adat
TC Clarity M stereo only accepts SPDIF signal (not ADAT)
To change what the Carbon is sending, in Pro Tools, go to Hardware Setup, Optical I/O page. Switch this to S/PDIF
__________________
Pro Tools Ult 2024.3.1, HDX 2, MTRX/SPQ, RME BBF Pro + MADIface Pro S1 x 2, Fire Max11 x 2, Dock, iPad Air5 Mac Mini 14,12, 12 core, macOS 13.6.6 RAM 32GB, SSD 4TB, GPU 19 core QNAP TVS-872XT 148TB TB3 |
#20
|
||||
|
||||
Re: Can anyone do a step by step on using the optical as adat
Quote:
What's the Input Mode (2) set to on the Clarity's System page? I'm looking at Page 15 in the guide and looks like you may be able to switch that between AES and S/PDIF. But, I have never used the Clarity device so I don't know how it needs to be configured.
__________________
Kyle Splittgerber Senior Principal Product Designer Avid Berkeley, CA |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
TC Clarity X | antonis | Post - Surround - Video | 0 | 05-02-2018 09:32 AM |
TC Clarity M | priorytools | Avid Pro Mixing General Discussion | 1 | 09-08-2016 01:10 PM |
Is anyone using Clarity X? | antonis | Post - Surround - Video | 0 | 03-08-2016 06:15 AM |
Mic clarity | bannerj | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 0 | 01-21-2004 09:07 AM |
Clarity in mixes | citi | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 29 | 06-20-2002 10:54 AM |