|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
No Audio Output from Only Analog 1-2
I'm using a RME UCX audio interface and I suddenly don't get audio output from Analog 1-2. If I use other programs like Ableton Live my Analog 1-2 (software playback channels) works great so I can rule out hardware/firmware issue. Only having this routing issue with Pro Tools 11. If I switch to Output 3-4, 5-6, 7-8, then the audio cuts back on, it works great. Only Analog 1-2 seems to cut out audio. I have checked my IO settings so many times and nothing has changed. Seems like its a stupid mistake somewhere in PT but I can't figure it out. I have also tried a computer restart.
-Todd MBP Mid 2012 RME Fireface UCX PT 11.3.1 |
#2
|
|||
|
|||
Re: No Audio Output from Only Analog 1-2
I have also tried a reinstall of PT 11 and it did not help the problem.
|
#3
|
||||
|
||||
Re: No Audio Output from Only Analog 1-2
Are all your tracks actually assigned correctly?(the photos look correct for the IO setup)
__________________
HP Z4 workstation, Mbox Studio https://www.facebook.com/search/top/...0sound%20works The better I drink, the more I mix BTW, my name is Dave, but most people call me.........................Dave |
#4
|
|||
|
|||
Re: No Audio Output from Only Analog 1-2
Yeah my tracks are assigned correctly. I attached a couple pictures to show this strange behavior. Maybe next step is to see if I have a corrupt pref file that stuck around even during the reinstall?
Thank you for the help! -Todd |
#5
|
|||
|
|||
Re: No Audio Output from Only Analog 1-2
This is so weird. Still have same issue. All other software works fine with my interface. Only Pro Tools won't spit out audio on Analog 1-2. I have no idea what to do at this point other than complete reformat. That would be such a PITA.
-Todd |
#6
|
||||
|
||||
Re: No Audio Output from Only Analog 1-2
Your screen shot cutoff where the Monitor Path icon would be on the Buss page.
|
#7
|
|||
|
|||
Re: No Audio Output from Only Analog 1-2
Sorry to necro the thread, but I'm having the same issue. I have an RME Madiface XT and am running Pro Tools Studio Version 2022.10.0 on Windows 11. Pro Tools sends audio to audio channels 1 and 2, but not to the specifically designated "Analog 1 and 2" that the speakers are connected to (the physical outputs on the back of the Madiface XT). The strangest thing is that when I route Pro Tools audio to audio channels 1 and 2, Pro Tools sends the audio to both my monitors AND what I have connected to audio channels 1 and 2 (which is currently an external input into my SSL Big Six mixer).
Was this ever resolved? Thanks, John |
#8
|
||||
|
||||
Re: No Audio Output from Only Analog 1-2
Quote:
I would try completely rebuilding all I/O paths. Try deleting all paths and then use the default button to restore the paths defined by the interface. Do this on the input, output, and bus tabs and then see if you still have a problem. Sent from my iPhone using Tapatalk
__________________
James Cadwallader Mac Studio, 64GB RAM, 1 TB SSD, Glyph 2TB USB3 HDD, OWC drive dock, Mac OS Monterey 12.6.8 Pro Tools Ultimate 2023.9, HD Native, Focusrite Red 8Pre Presonus Faderport, Pro Tools | Control |
#9
|
|||
|
|||
Re: No Audio Output from Only Analog 1-2
Quote:
__________________
~Will |
#10
|
||||
|
||||
Re: No Audio Output from Only Analog 1-2
This ^^^^
If you're not in DAW Mode in TotalMix, Pro Tools will output to the Software Playback - the middle layer in TotalMix - and you need to route that Software Playback to Analog 1/2 Out in TotalMix, which can be done in Matrix. TotalMix is great, but does take some thought.
__________________
Take your projects to the next level with a non-union national read at reasonable rates Demos: brucehayward dot com SonoBus Source-Connect: brucehayward Options for Remote Direction |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Monitor output or Main Analog Output? | A_alRumaidh | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 4 | 02-17-2015 07:19 AM |
Adat output louder than analog output ? | sanzrodrigo | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 2 | 03-03-2010 11:42 PM |
DIGI 003 Factory - No Analog Audio Input / Output | travisgregorash | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 1 | 08-08-2007 08:53 PM |
7.3 still has the core audio mirror analog output BUG! WHEN? | dkstudios | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 8 | 07-09-2007 10:02 AM |
Interfacing 888 analog output with analog console | Siegfried Meier | Pro Tools TDM Systems (Mac) | 3 | 09-12-2003 01:26 PM |