![]() |
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
![]()
Hello,
It is with a lot of frustration that I am writing this message. ![]() Since several ProTools sessions, when I leave the software (to go to sleep) and when I come back to work on it. All the song has a lower pitch. (one tonality) I admit I don't understand the bug, I tried to reinstall protools completely but nothing works, I also reinstalled my sound card, even changed sound card (Fast Track 400 -> Scarlett I2I) The problem is the same. Even when I export the complete mix, everything is exported with a lower tonality... Do you have an idea? Thanks a lot :) |
#2
|
|||
|
|||
![]()
My first guess is maybe something wacky is happening with your sample rate.
|
#3
|
|||
|
|||
![]()
That's my first guess too. Perhaps you recorded at 96K but your playback engine is set to 88.2k. Or you recorded at 48K and your playback engine is set to 44.1K.
__________________
Obsidian Dragon
MacbookPro14,3 - Intel Core i7 3.1 GHz, 16 GB Mac Studio M1Max - 64GB MacOS 12.6 running Protools 2022.10 |
#4
|
|||
|
|||
![]()
Sounds like you’ve screwed something up with sample rate.
Let’s start with basic info: Mac or Windows? What is the session sample rate? Where do your system sounds (music, beeps, internet, etc) send their sound (same outs as ProTools)?
__________________
Pro Tools Ult 2022.7, HDX 3, MTRX/SPQ, HD Omni • S1 x 2, FireHD x 2, Dock, iPad • Mac Pro 5,1 - 3.06 GHz 12 core - macOS 10.13.6 • RAM 64GB, SSD 4 x 4TB, GPU GTX 980 4GB Pro Tools Ult 2022.12, RME BBF Pro • Mac Mini 14,12 - 12 core - macOS 13.2 • RAM 32GB, SSD 4TB, GPU 19 core |
#5
|
|||
|
|||
![]()
Thanks for all your feedback,
For the configuration I am on W10 64b Rayzen 5 3600 32GO RAM Sound card : M Audio C400 Fast Track Concerning the sound card, It is in 44,1KHz, 24Bits My protools session is also in 24Khz 24Bits Delay semple is 91 samples ___ Playback engine : FastTrackC400 Hardware buffer size 512 samples Video engine : Yes Optimization: Ignore errors: Unchecked Dynamic processing: Yes Hard disk reading: Cache size: Normal |
#6
|
||||
|
||||
![]()
it is a sampling rate mismatch and you can verify it by trying to tune a track and see that the plugin confirms your hunch. if tuning plugin says the track is spot on, clear your ears
__________________
Janne What we do in life, echoes in eternity. |
#7
|
||||
|
||||
![]()
Good advice above. 3 more things to keep in mind:
#1-since you are on Windows, go into Settings>Sound and make sure that your interface is NOT the Windows Playback Device. Set that to the computer's sound card(likely "Realtek"). The reason for this is that windows likes to take control of the interface and lock Pro Tools out of setting the sample rate(you may need to check and reset this after a Windows update). ![]() #2-The term "sound card" usually refers to the on-board sound of the computer. Your external box(the Fast Track) is an "interface" ![]() #3-If you are going to leave your computer on, but leaving for any length of time, Close Pro Tools. The reason is that Pro Tools just doesn't like sitting idle for hours on end(at least not for me). And, if you lose power while a session is open, its possible that PT is in the process of saving a backup(assuming you have auto-backup enabled), the data could be corrupted. ![]()
__________________
Gigabyte X79/intel i7 3930K, 32GB RAM, HD/Native, 192 IO https://www.facebook.com/search/top/...0sound%20works The better I drink, the more I mix ![]() BTW, my name is Dave, but most people call me.........................Dave |
#8
|
||||
|
||||
![]()
I would run into similar issue back when using an external clock. Definitely a sample rate mismatch. You have the right advice above, but I wanted to add that your recorded audio isn't ruined, it's just not playing back correctly. Unless you had conflicting sample rates between two devices at the time of recording, but it doesn't sound like that's the case here.
|
#9
|
|||
|
|||
![]() Quote:
I'm not doing a lot of video, but if I recall, some video standards run at 48KHz instead of the 44.1KHz that most music compatible disc used. Could it be that when you recorded your audio along with the video that it is pulling it to that sample rate. Or the other way around where the video is pulling the audio to that sample rate during playback. Try to separate the video from the audio and see what happens.
__________________
Obsidian Dragon
MacbookPro14,3 - Intel Core i7 3.1 GHz, 16 GB Mac Studio M1Max - 64GB MacOS 12.6 running Protools 2022.10 |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
12.5 crashes, perma-pinwheel upon reopening session | jonathan jetter | Pro Tools 12 | 2 | 07-11-2016 01:18 PM |
Frozen files missing when reopening session (12.4 only) | electrodaddy | Pro Tools 12 | 0 | 01-19-2016 04:12 AM |
Plugin settings disappear when reopening the session - PT 10.2 | Luke83 | macOS | 0 | 07-27-2012 09:06 AM |
Problem with reopening session saved in pt5 | gbr8 | Windows | 0 | 06-04-2012 06:26 AM |
Session layout not being remembered after closing/reopening a session/Pro Tools! | DJ Hellfire | Pro Tools 10 | 1 | 12-23-2011 01:05 AM |