Avid Pro Audio Community

Avid Pro Audio Community

How to Join & Post  •  Community Terms of Use  •  Help Us Help You

Knowledge Base Search  •  Community Search  •  Learn & Support


Avid Home Page

Go Back   Avid Pro Audio Community > Legacy Products > 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win)

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 07-05-2004, 09:29 PM
Aussie Adam Aussie Adam is offline
Member
 
Join Date: Apr 2004
Posts: 9
Default Constant 9129 and 6086 error messages

I have a Dell inspiron 8500 and I am using an Mbox and I have spent hours on the phone to both Dell and Digidesign and no one can solve my problem with constant error messages (9129 and 6086).
Even if I am playing with no tracks recorded, just a blank template, the program stops and gives me one of two of those messages telling me to adjust the buffer size. I can't get through five minutes without these messages constantly popping up. This has been going on for months now.
If anyone has come across these issues before any advice is appreciated
Aussie Adam
Reply With Quote
  #2  
Old 07-07-2004, 06:15 AM
Aussie Scott Aussie Scott is offline
Member
 
Join Date: Mar 2004
Location: Melbourne, Australia
Posts: 407
Default Re: Constant 9129 and 6086 error messages

The ole 9129 is an old enemy of mine. I too was using a laptop (Fujitsu Lifebook)and my diagnosis in the end was the IRQ setup. What other divices are using the USB IRQ? See if the BIOS will allow you to give each device it's own IRQ. Hope thats useful.
__________________
"...I asked you not to tell me that!"
Reply With Quote
  #3  
Old 07-07-2004, 08:48 AM
bigbubbaj bigbubbaj is offline
Member
 
Join Date: May 2004
Location: Colorado, USA
Posts: 1,457
Default Re: Constant 9129 and 6086 error messages

Try bumping your color depth down from 32 bit to 16 bit.

PTLE is a graphics hog believe it or not.

That might help.
__________________
5198 Studios
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
constant error '-9129' after 9.0.3 upgrade gthrasher Windows 0 07-11-2011 12:37 PM
(-9094) & (-9129) error messages jh1 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 13 10-01-2005 12:56 PM
Error Messages (-9129) & (-9093) HELP! Mistermac 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 10 02-06-2005 02:32 PM
Constant H/W buffer errors. - 6086 & -9129 Aussie Adam 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 3 04-21-2004 03:03 PM
Help! constant -9129 error using Mbox cwmiii3 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 0 10-29-2003 05:57 PM


All times are GMT -7. The time now is 10:34 PM.


Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com