Protools 10 loading error 0x00000008

[jeam25]

Hi
Im having the loading PT10 loading error 0x000008.
Its driving me crazy and it started from nothing .
A few months ago i had it but it was reslved by turning the DEP windows on default setting but this time i have no clue at all because it doesnt work .

Im on windows pro 64bit SP1 and the problem is on PT10.3.10 ONLY PT12.2.1 runs perfect .
Ive formated my PC . Changed FW cards . Changed ilok to differents USB ports . Made the OS necesary tweaks and no.luck .
The problem started from.one day to another ..no more no less . :-/ ..I was working perfectly good last night and this morning started this behavior .


Thanks for any help !

[Craig F]

A) wrong section
B) Unsupported OS
C) Unsupported CPU

first guess, a OS update that broke 10

[sw rec]

Avid did indeed STRONGLY advise against updating to Windows 10.

[jeam25]

ok guys ...

Sorry i didnt clarify on my OP my OS . Im on Windows 7 rigth now NOT win 10 . And for my CPU is perfectly supported ive been using it years from now with PT 9, 10 , 11 , 12 .

Btw if you read my lastest post you will learn that i got win 10 to work great PT 10 and 12 . The reason that i roll back was that Win 10 have a idle latency that i couldnt resolve because i have a lot if work to do right now and short time to do it . But you can bet im going to try resolve it as soon as i have the time available because PT runs better in Win10 than Win7 appart from the idle issue .

Anyway like i said everthing was working perfectly but suddenly this issue started . I have to mention that on one of my lasest posts i said that i resolved by switching win DEP to it default state but this time is not the case .

I posted in this section because ive started to have some issues since i have PT 10 and 12 coinstalled . Things that i never had with PT 11 and 10 and since PT10 works perfectly good alone before , i think that the issues are induced by PT 12 so ...thats why i posted here .

Thanks for any help again !

[jeam25]

**UPDATE**

Well SOLVED !!

It was again the DEP settings ..this time i had to change it from the CMD to " Optin " .
Not shure why this changning but it was it . Im gonna dig deep on this .

Soo... my CPU is fine my OS is fine ..hope this help someone !!