Avid Pro Audio Community

Avid Pro Audio Community

How to Join & Post  •  Community Terms of Use  •  Help Us Help You

Knowledge Base Search  •  Community Search  •  Learn & Support


Avid Home Page

Go Back   Avid Pro Audio Community > Pro Tools Software > Pro Tools

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 11-25-2022, 03:16 AM
chrisVVS chrisVVS is offline
Member
 
Join Date: Oct 2022
Location: UK
Posts: 19
Default Source Nexus noise bursts on closing session

Here's an unusual one someone might have experience of.
I use Source Connect to connect to other studios for voiceovers. I use Source Nexus to route Source Connect, Zoom, Teams, Cleanfeed etc into Pro Tools. When I close the session I get a huge blast of noise.
I spoke to the people at Source Elements, who told me that it was because the Nexus plug-in closes down before Pro Tools does, causing a feedback loop for an instant before the session closes. I can confirm this - if I open the session without the Source Nexus iLok (meaning it won't open when Pro Tools opens) then I get the same feedback.
Great. I understand why. But why is nobody else experiencing it apart from me? Any clues?
Reply With Quote
  #2  
Old 11-25-2022, 11:49 AM
The Weed's Avatar
The Weed The Weed is offline
Member
 
Join Date: Jul 2001
Location: Toronto, Ontario, Canada
Posts: 6,978
Default Re: Source Nexus noise bursts on closing session

I can't answer your question directly, but maybe you could try the trial from www.gingeraudio.com and see if it does the same thing.
__________________
Take your projects to the next level with a
non-union national read at reasonable rates
Demos: brucehayward dot com
SonoBus
Source-Connect: brucehayward
Options for Remote Direction
Reply With Quote
  #3  
Old 11-25-2022, 12:11 PM
audiobob's Avatar
audiobob audiobob is online now
Member
 
Join Date: Nov 2001
Location: Houston
Posts: 980
Default Re: Source Nexus noise bursts on closing session

I've owned SN for over a year doing the same type of work and never had this issue. Are you on Mac or Widows. What interface are you using?
Reply With Quote
  #4  
Old 11-25-2022, 05:52 PM
mattrixx mattrixx is offline
Member
 
Join Date: Jan 2005
Location: Adelaide - Australia
Posts: 1,032
Default Re: Source Nexus noise bursts on closing session

Quote:
Originally Posted by chrisVVS View Post
Here's an unusual one someone might have experience of.
I use Source Connect to connect to other studios for voiceovers. I use Source Nexus to route Source Connect, Zoom, Teams, Cleanfeed etc into Pro Tools. When I close the session I get a huge blast of noise.
I spoke to the people at Source Elements, who told me that it was because the Nexus plug-in closes down before Pro Tools does, causing a feedback loop for an instant before the session closes. I can confirm this - if I open the session without the Source Nexus iLok (meaning it won't open when Pro Tools opens) then I get the same feedback.
Great. I understand why. But why is nobody else experiencing it apart from me? Any clues?
I'm using SN in the same way and have all of the SN tracks in a routing folder and mute that when it's not ins use.
__________________
Matt McKenzie-Smith
mattrixx.net
SourceConnect - mattrixx
AVID Collab user - mattrixx

MacStudio Ultra / LogicProX / IzotopeRX10+ / SourceConnect / MelodyneStudio5 / WAVES Mercury / NI KompleteUltimate / ProToolsUltimate / RME UFXII / AVID S3 + DOCK / Barefoot MM27 gen2 / Barefoot FP01
Reply With Quote
  #5  
Old 11-28-2022, 08:20 AM
chrisVVS chrisVVS is offline
Member
 
Join Date: Oct 2022
Location: UK
Posts: 19
Default Re: Source Nexus noise bursts on closing session

Thanks all. I'm using a Rubix 44, but it happens wth all my otjer interfaces too. I've spoken to the people at SC and they've got my template, but I'm still trying to work this out.
I've attached a link to a short video of my entire template showing what heppens when I activate and deactivate the talkback track feeding the sends -

https://dropover.cloud/e46982
Reply With Quote
  #6  
Old 11-28-2022, 08:30 AM
sw rec sw rec is offline
Member
 
Join Date: Oct 2005
Location: Colo Spgs Colo
Posts: 6,072
Default Re: Source Nexus noise bursts on closing session

Mute the output before you close it?
Reply With Quote
  #7  
Old 11-28-2022, 08:53 AM
its2loud its2loud is offline
Member
 
Join Date: Dec 2014
Location: Los Angeles
Posts: 1,274
Default Re: Source Nexus noise bursts on closing session

You don’t need these extra Auxes. They’re redundant and not necessary.

Create your sends from the original input tracks as the arrows point back to in the photo.
Attached Images
File Type: jpg 3D90221C-AC10-45DE-A5C9-6D4E1E8C3A71.jpg (70.4 KB, 0 views)
Reply With Quote
  #8  
Old 11-28-2022, 09:49 AM
chrisVVS chrisVVS is offline
Member
 
Join Date: Oct 2022
Location: UK
Posts: 19
Default Re: Source Nexus noise bursts on closing session

You're suggesting that I put the sends on the SC I/O tracks instead?
Reply With Quote
  #9  
Old 11-28-2022, 10:08 AM
chrisVVS chrisVVS is offline
Member
 
Join Date: Oct 2022
Location: UK
Posts: 19
Default Re: Source Nexus noise bursts on closing session

Moving the sends to the IO tracks gives the same result as leaving them on the AUX tracks but it's more convenient to be able to change level from the track I'm listening on. Can anyone see an advantage to putting the sends on the IO tracks? Also, SC support have told me 'It makes sense that the feedback is caused by the talkback channel routing setup. so I'm hoping someone can help. Could anyone provide their template..?
Reply With Quote
  #10  
Old 11-28-2022, 12:47 PM
its2loud its2loud is offline
Member
 
Join Date: Dec 2014
Location: Los Angeles
Posts: 1,274
Default Re: Source Nexus noise bursts on closing session

Quote:
Originally Posted by chrisVVS View Post
Moving the sends to the IO tracks gives the same result as leaving them on the AUX tracks but it's more convenient to be able to change level from the track I'm listening on. Can anyone see an advantage to putting the sends on the IO tracks? Also, SC support have told me 'It makes sense that the feedback is caused by the talkback channel routing setup. so I'm hoping someone can help. Could anyone provide their template..?
Remove Muteomatic on your TB input and see what happens. Put a signal generator on your TB input and chase the routing of that talkback mic. Is it looping back around to your inputs? Are any of your Source Nexus plugins in "thru" mode? Can't tell from the video

It's too hard to determine where the issue is without digging into your session. If you want to share you session template that might help.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Source-Nexus vs Source-Connect Standard ??? EGS Windows 20 06-10-2022 11:52 AM
Source Elements releases Windows version of Source-Nexus sourceelements Partner Announcements 0 01-31-2022 09:21 AM
Source Nexus Alternative Ben Wood Pro Tools HDX & HD Native Systems (Mac) 15 01-05-2022 10:03 AM
Sale: Source Elements' Source Nexus Basic and Pro SoundByLaura Buy & Sell 1 01-01-2017 09:30 PM
Noise bursts and clicks when opening session janmuths 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) 1 01-05-2008 10:13 PM


All times are GMT -7. The time now is 02:03 PM.


Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com