|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
S1 Faders not corresponding to Pro Tools Mixer
Hi
I have an intermittent problem where the position of one or more faders on my S1 do not correspond to the software faders in Pro Tools. When the problem occurs, the S1 fader(s) remain fully closed, even when the software faders are open at zero. If I try to move a software fader using my mouse it jumps between fully faded out and where I'm trying to move it to, as if it knows that there's an external controller telling Pro Tools that the fader is shut. It's usually just the left-hand most fader on my S1 that's affected, but sometimes more. Problem can be cleared by closing and re-opening my Pro Tools session. Video of problem can be viewed here: https://www.dropbox.com/s/lhr65tw8rl...Issue.mov?dl=0 I've opened a case with Avid support and currently waiting to hear back. In the meantime, anyone any thoughts? Sandra system report pasted below, and outline system specs, Pro Tools version etc. in signature. Many thanks! SiSoftware Sandra ID Host Name : NOVATECH-PT Workgroup : WORKGROUP Computer Model : NovaTech PC-X017201 AMI PLATFORM Serial Number : ****** Chassis : NovaTech Desktop Mainboard : ASUS PRIME Z590-A Serial Number : ******** BIOS : AMI (OEM) 1001 06/21/2021 Intel Management Engine (ME) : 15.0.21.1549 Total Memory : 63.88GB DIMM DDR4 Processors Processor : 11th Gen Intel(R) Core(TM) i9-11900 @ 2.50GHz (8C 2.5GHz/5.2GHz, 2.2GHz/4.2GHz IMC, 8x 512kB L2, 16MB L3) Socket/Slot : FC LGA1200 Chipset Memory Controller : ASUS Core11S (RocketLake-S 8C) Host Bridge/DRAM Registers 100MHz, 2x 32GB DIMM DDR4 2.13GHz 128-bit Memory Module(s) Memory Module : Corsair/Micron CMK32GX4M2D3000C16 16GB DDR4 1Rx8 PC4-24000U DDR4-3004 (15-15-15-37 4-52-17-6) Memory Module : Corsair/Micron CMK32GX4M2D3000C16 16GB DDR4 1Rx8 PC4-24000U DDR4-3004 (15-15-15-37 4-52-17-6) Memory Module : Corsair/Micron CMK32GX4M2D3000C16 16GB DDR4 1Rx8 PC4-24000U DDR4-3004 (15-15-15-37 4-52-17-6) Memory Module : Corsair/Micron CMK32GX4M2D3000C16 16GB DDR4 1Rx8 PC4-24000U DDR4-3004 (15-15-15-37 4-52-17-6) Video System Monitor/Panel : EGA Elgato (1920x1080) Monitor/Panel : AUS VA229 (1920x1080, 21.7") Monitor/Panel : AUS VA229 (1920x1080, 21.7") Monitor/Panel : AUS VA229 (1920x1080, 21.7") Video Adapter : NVIDIA GeForce RTX 3060 (3584S 14C SM6.5 1.85GHz, 2.2MB L2, 11.9GB 15GHz 192-bit, PCIe 4.0 x16) Video Adapter : NVIDIA GeForce RTX 3060 (3584S 14C SM6.5 1.85GHz, 2.2MB L2, 11.9GB 14.6GHz 192-bit, PCIe 4.0 x16) Video Adapter : NVIDIA GeForce RTX 3060 (3584S 14C SM6.5 1.85GHz, 2.2MB L2, 11.9GB 14.6GHz 192-bit, PCIe 4.0 x16) Video Adapter : NVIDIA GeForce RTX 3060 (3584S 14C SM6.5 1.85GHz, 2.2MB L2, 11.9GB 14.6GHz 192-bit, PCIe 4.0 x16) Graphics Processor CUDA : NVIDIA GeForce RTX 3060 (1792S 28C SM8.6 1.85GHz, 2.2MB L2, 12GB 14.6GHz 192-bit) OpenCL : NVIDIA GeForce RTX 3060 (1792S 28C SM3.0 1.85GHz, 2.2MB L2, 12GB 14.6GHz 192-bit) D3D 11 : NVIDIA GeForce RTX 3060 (3584S 14C SM12.1 1.85GHz, 2.2MB L2, 11.9GB 14.6GHz 192-bit) OpenGL : NVIDIA GeForce RTX 3060/PCIe/SSE2 (3584S 14C SM4.60 1.85GHz, 2.2MB L2, 12GB 14.6GHz 192-bit) OpenGL : NVIDIA GeForce RTX 3060/PCIe/SSE2 (3584S 14C SM4.60 1.85GHz, 2.2MB L2, 12GB 14.6GHz 192-bit) OpenGL : NVIDIA GeForce RTX 3060/PCIe/SSE2 (3584S 14C SM4.60 1.85GHz, 2.2MB L2, 12GB 14.6GHz 192-bit) OpenGL : NVIDIA GeForce RTX 3060/PCIe/SSE2 (3584S 14C SM4.60 1.85GHz, 2.2MB L2, 12GB 14.6GHz 192-bit) Storage Devices Disk : Samsung SSD 970 PRO 1TB (1TB, PCIe3x4/NVMe, SED) Disk : Samsung SSD 870 QVO 4TB (4TB, SATA600, 2.5", SSD, SED) Logical Storage Devices WINDOWS (C:) : 953GB (NTFS, 4kB) @ Samsung SSD 970 PRO 1TB (1TB, PCIe3x4/NVMe, SED) RECOVERY : 450MB (NTFS, 4kB) @ Samsung SSD 970 PRO 1TB (1TB, PCIe3x4/NVMe, SED) DATA (D:) : 4TB (NTFS, 4kB) @ Samsung SSD 870 QVO 4TB (4TB, SATA600, 2.5", SSD, SED) SYSTEM : 296MB (FAT32, 4kB) @ Samsung SSD 970 PRO 1TB (1TB, PCIe3x4/NVMe, SED) Peripherals LPC Hub Controller : ASUS Intel(R) LPC Controller (Z590) - 4385 Audio Device : MSI High Definition Audio Controller Audio Codec : nVidia 009F Serial Port(s) : 1 Disk Controller : ASUS Core11 (Tiger Lake-H) Shared SRAM Disk Controller : ASUS Intel(R) 500 Series Chipset Family SATA AHCI Controller Disk Controller : Samsung NVMe SSD Controller SM981/PM981 USB Controller : ASUS Core11 (Tiger Lake-H) USB 3.2 Gen 2x1 xHCI Host Controller SMBus/i2c Controller : Intel ICH SMBus Printers and Faxes Printer : Microsoft XPS Document Writer v4 (600x600, Colour) Printer : Microsoft Print To PDF (600x600, Colour) Printer : HP LaserJet 500 color MFP M570 PCL6 Class Driver (600x600, Colour) Fax : Microsoft Shared Fax Driver (200x200) Printer : Adobe PDF Converter (4000x4000, Colour) Scanners & Cameras Scanner : Microsoft NPI187749 (HP LaserJet 500 colorMFP M570dw) (Scanner, USB) Biometrics Voice : Analog NUI Voice Virtual Sensor (Voice) Network Services Network Adapter : Intel(R) Ethernet Controller (3) I225-V (Ethernet, 1Gbps) Operating System Windows System : Microsoft Windows 10 Professional 10.0.19043 Platform Compliance : x64 Performance Enhancing Tips Warning 2513 : TPM not detected. Some security features are unavailable. Tip 3 : Double-click tip or press Enter while a tip is selected for more information about the tip.
__________________
Windows 10 Pro for Workstations 64 bit 21H1 ASUS PRIME Z590-A Motherboard 11th Gen Intel Core i9-11900 @ 2.50GHz 64GB RAM NVIDIA GeForce RTX 3060 (MSI) RME Babyface Pro FS Pro Tools Ultimate 2021.6.0 Avid S1 running firmware 21.6.7 EuControl v2021.6.0.181 EUCON v4.7.9.181 |
#2
|
|||
|
|||
Re: S1 Faders not corresponding to Pro Tools Mixer
The S1 has a few test modes you might want to try in order to determine if it’s a hardware issue.
|
#3
|
|||
|
|||
Re: S1 Faders not corresponding to Pro Tools Mixer
Thanks #its2loud.
Have just tested every fader, button and knob using the S1's test mode and all test fine.
__________________
Windows 10 Pro for Workstations 64 bit 21H1 ASUS PRIME Z590-A Motherboard 11th Gen Intel Core i9-11900 @ 2.50GHz 64GB RAM NVIDIA GeForce RTX 3060 (MSI) RME Babyface Pro FS Pro Tools Ultimate 2021.6.0 Avid S1 running firmware 21.6.7 EuControl v2021.6.0.181 EUCON v4.7.9.181 |
#4
|
|||
|
|||
Re: S1 Faders not corresponding to Pro Tools Mixer
Did you by chance check to see if a firmware update was required for the S1.
EuControl will show you on this page. |
#5
|
|||
|
|||
Re: S1 Faders not corresponding to Pro Tools Mixer
Yep, already checked and S1 is running latest firmware (21.6.7.0).
Thanks a lot for your suggestions - please keep them coming.
__________________
Windows 10 Pro for Workstations 64 bit 21H1 ASUS PRIME Z590-A Motherboard 11th Gen Intel Core i9-11900 @ 2.50GHz 64GB RAM NVIDIA GeForce RTX 3060 (MSI) RME Babyface Pro FS Pro Tools Ultimate 2021.6.0 Avid S1 running firmware 21.6.7 EuControl v2021.6.0.181 EUCON v4.7.9.181 |
#6
|
|||
|
|||
S1 Faders not corresponding to Pro Tools Mixer
Since I’m not a Windows user I can’t be sure but this might be a networking issue.
Without knowing how you have the S1 networked it’s a bit difficulty to determine the cause. It seems the hardware checks out ok. I can’t determine which version of Pro Tools and EuControl you’re running. |
#7
|
|||
|
|||
Re: S1 Faders not corresponding to Pro Tools Mixer
S1 plugged into a Netgear GS108 switch, along with my Pro Tools PC, a printer, a WiFi AP, a laptop, and an 'incoming' broadband feed from my router at the other end of the house.
__________________
Windows 10 Pro for Workstations 64 bit 21H1 ASUS PRIME Z590-A Motherboard 11th Gen Intel Core i9-11900 @ 2.50GHz 64GB RAM NVIDIA GeForce RTX 3060 (MSI) RME Babyface Pro FS Pro Tools Ultimate 2021.6.0 Avid S1 running firmware 21.6.7 EuControl v2021.6.0.181 EUCON v4.7.9.181 |
#8
|
|||
|
|||
Re: S1 Faders not corresponding to Pro Tools Mixer
Any chance of an IP address conflict?
|
#9
|
|||
|
|||
Re: S1 Faders not corresponding to Pro Tools Mixer
No I don't think so.
S1 will be working fine, then I'll load a new session and it'll start mis-behaving as in the video, then I'll close and open the same session and it'll start working properly again.
__________________
Windows 10 Pro for Workstations 64 bit 21H1 ASUS PRIME Z590-A Motherboard 11th Gen Intel Core i9-11900 @ 2.50GHz 64GB RAM NVIDIA GeForce RTX 3060 (MSI) RME Babyface Pro FS Pro Tools Ultimate 2021.6.0 Avid S1 running firmware 21.6.7 EuControl v2021.6.0.181 EUCON v4.7.9.181 |
#10
|
|||
|
|||
Re: S1 Faders not corresponding to Pro Tools Mixer
Quote:
Might be something embedded in Windows then? Not really sure about this one. Sorry. Maybe someone with more Windows knowledge will jump in. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pro tools 2018 / Digi 002 Mixer Faders issue | Kdose | Pro Tools 2018 | 11 | 10-30-2018 01:31 AM |
Pro Tools Mixer Faders/Peaks not responding | sweetambition | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 4 | 07-10-2012 03:33 PM |
Help: 002 mixer faders locked | mm4dman | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 1 | 12-18-2009 10:06 PM |
How can I use MIDI Faders with Mixer? | products7074740 | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 3 | 01-22-2009 10:56 PM |
HELP! My Mixer Faders Keep Freezing Up! | flymax | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 0 | 11-22-2001 12:23 AM |