|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#11
|
|||
|
|||
Re: MBox 3 Pro Master Volume
just a joke! it is snow leopard mac os 10!
|
#12
|
|||
|
|||
Re: MBox 3 Pro Master Volume
|
#13
|
||||
|
||||
Re: MBox 3 Pro Master Volume
OK peck
Any reports from the Windows guys on the same issue(s)? [edit] Ah, Windows too on the Volume issue: http://duc.avid.com/showpost.php?p=1857950&postcount=5 |
#14
|
|||
|
|||
Re: MBox 3 Pro Master Volume
|
#15
|
|||
|
|||
Re: MBox 3 Pro Master Volume
I just purchased an MBOX Pro 3. The volume control doesn't seem to respond very smoothly at all. Is this normal? I read very good reviews about this unit and I would have thought if this was normal, it would have shown in somebody's review.
|
#16
|
|||
|
|||
Re: MBox 3 Pro Master Volume
On my mbox3 pro the large control works fine. The small, individual controls seem to have the wrong taper....there is a large jump in gain in the last few degrees of rotation. This is not an occasional problem, it is always that way. This would not be a problem at all if it had a little more gain. In that case I might not even notice the problem. To tell you the truth, after a year of putting up with it, I am used to it & it doesn't really give me a problem.
__________________
Main Workstation: Pro Tools 2023.12.1, Windows 11, HP Z4 Xeon 8 core W2145, 64 GB DDR4, Omni, Artist Mix, Sync X, Eleven R(2 of them), UAD 2 PCIe card |
#17
|
|||
|
|||
Re: MBox 3 Pro Master Volume
My master volume has been fine until right now. Its all jumpy and weird. It is clearly a digital control and mine isn't working right at the moment. The volumes jump around and there's a 1 secondish delay on the motions I make as well…gonna reboot and see if it goes away.
|
#18
|
|||
|
|||
Re: MBox 3 Pro Master Volume
Weird. I didn't have to reboot, I just bypassed a couple of plugins and it fixed itself. There's a software bug in there somewhere.
|
#19
|
|||
|
|||
Re: MBox 3 Pro Master Volume
I just started having the problem mentioned in this thread: the main volume knob doesn't respond accurately, volume spikes, etc. Is there ANY answer to this problem? AVID? How do I fix this? It certainly isn't going to help my recording sessions run smoothly. I've had the unit for less than a year and haven't used it all that much. Help....
|
#20
|
||||
|
||||
Re: MBox 3 Pro Master Volume
Anyone...?
The same problem here. No sound untill I turn the knob to 8 o'clock. At this point the sound jumps out at me at pretty high level. No matter - pro tools, itunes, youtube. Is there any way to setup this properly??? I went through the whole manual but no single word about the knob configuration. Please help |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Mbox Pro hissing, crackling, master volume issues | jonz44 | FireWire & USB Audio Interfaces (Win) | 18 | 09-29-2013 02:31 AM |
Mbox Pro 3 master volume knob initial adjust jumps from no sound to sound : | | Focuret | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 2 | 11-17-2012 04:45 PM |
MBox 3 Pro Master Volume Knob...Ugh! Help | anackman | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 1 | 02-15-2011 12:42 PM |
Master Volume | bderkach | General Discussion | 2 | 02-27-2003 03:12 PM |
I need a Master Volume box | Armando | Pro Tools TDM Systems (Mac) | 10 | 05-03-2002 05:48 PM |