|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
|
|
Thread Tools | Search this Thread | Display Modes |
|
#1
|
|||
|
|||
MTRX/DADMAN output to multiple Spkr Outputs simultaneously with same stereo source?
I have scoured software/manuals to figure out how to create a "party mode" where I can output a stereo source to multiple stereo monitor destinations. Sources can be summed, but Spkrs appear to only be switched? Has anyone figured out how to do this? To be clear, for normal monitoring, I would only be using one set of monitors, but there are listening situations where I would like to fire up all the monitors just for fun. Has anyone done this - or have any idea how to make it work?
BTW, unrelated. If anyone is interested, I have created a "virtual MOM" device that allows you to have MIDI control over any of the functions that MOM can map to. I did this because I have 14 sources and I wanted to create a set of dedicated buttons for all 14 sources (and of course MOM only gives you three on a single layer). With MIDI control, one can use just about anything to access these functions - this would allow you to use Keyboard Maestro and a Streamdeck to create a new "MOM" device. MTRX/DADMan and DAD MOM is a crazy powerful audio routing/monitor setup. The more I use it, the more I find it can do. It is amazing.
__________________
__________________ Pro Tools Ultimate 2019.12, macOS 10.15.3, MTRX, MOM, HDX 2, Mac Pro 7,1, 2.5 Ghz 28-Core, 384GB RAM, Accelsior 4M2 SSD Last edited by Jared_TL; 04-14-2021 at 05:50 PM. |
#2
|
||||
|
||||
Re: MTRX/DADMAN output to multiple Spkr Outputs simultaneously with same stereo sourc
Quote:
G
__________________
Composer/Sound Designer/Protools 2024.3 Ultimate, MTRXII-TB3, DADMAN MOM, Cisco SG350-10MP EthernetHUB, KLANG:quelle 4 Channel Dante™Headphone Amp, DVS,MADI, Mac Studio Ultra,128 RAM/4TB SSD, Ventura 13.6.5, DP 11.3, Logic Pro X 10.8.1 DOLBY ATMOS Facility/MPSE Motion Picture Sound Editors Avid Certified Professional ProTools/Dolby ATMOS |
#3
|
|||
|
|||
Re: MTRX/DADMAN output to multiple Spkr Outputs simultaneously with same stereo sourc
2 ways I can think of:
1st option Create a single speaker set (custom) with all your speakers. Then create a fold down matrix (custom) that sends L input to all the “left” speakers and “R” input to all “right speakers”. You can adjust the balance discrepancies between sets of speakers from the fold down level being sent to each. For your day-to-day, create “fold downs” for each set where input ONLY goes to one set. Then you can flip between fold downs. Label fold downs accordingly. 2nd option Create multiple monitors in ProMon. Your input sets and output sets already created are recallable as you build each monitor group. Each monitor acts independently so you can enable the same input on each and adjust levels out on each (but now each monitor goes to a different speaker set). Mute/disengage non main monitor group when not in use. I do a version of the 1st with my surround setup to send stereo to all (but all my speakers are already in a set) I’d be interested in seeing your virtual MOM that’s midi based. Do you have that downloadable anywhere?
__________________
Pro Tools Ult 2024.3, HDX 2, MTRX/SPQ, RME BBF Pro + MADIface Pro • S1 x 2, Fire HD10 + Max11, Dock, iPad Air5 • Mac Mini 14,12, 12 core, macOS 13.6.5 • RAM 32GB, SSD 4TB, GPU 19 core • QNAP TVS-872XT 148TB TB3 |
#4
|
|||
|
|||
Re: MTRX/DADMAN output to multiple Spkr Outputs simultaneously with same stereo sourc
A MIDIMOM? I am very interested as well.
|
#5
|
|||
|
|||
Re: MTRX/DADMAN output to multiple Spkr Outputs simultaneously with same stereo sourc
Quote:
___ |
#6
|
||||
|
||||
Re: MTRX/DADMAN output to multiple Spkr Outputs simultaneously with same stereo sourc
There's also a rogue app floating about the app store:
https://apps.apple.com/us/app/mom/id...latform=iphone Jeff |
#7
|
|||
|
|||
Re: MTRX/DADMAN output to multiple Spkr Outputs simultaneously with same stereo sourc
Quote:
__________________
https://lukehoward.com/ |
#8
|
||||
|
||||
Re: MTRX/DADMAN output to multiple Spkr Outputs simultaneously with same stereo sourc
Just my 2 cents; this is something I would never do because of all the phase and timing issues inherent in running multiple speakers with the same sound. I guess its 30+ years of live sound(IOW, this has way more chance of sounding bad than good)
__________________
HP Z4 workstation, Mbox Studio https://www.facebook.com/search/top/...0sound%20works The better I drink, the more I mix BTW, my name is Dave, but most people call me.........................Dave |
#9
|
|||
|
|||
Re: MTRX/DADMAN output to multiple Spkr Outputs simultaneously with same stereo sourc
I used to have to do this years ago with certain rap clients when the Meyer HD1s wouldn't go loud enough. It was easy with the Trident console we had, as the speaker set switches on the monitor section were latching. I heard that after I left that studio, the next guy they had turned the HD1s up so loud that they vibrated off the stands and fell onto the floor, which required being sent back to Meyer to be repaired. I heard that when they got them back, they tied them down to the stands with ratchet straps
Sorry for the OT post.
__________________
Scott Gatteño |
#10
|
|||
|
|||
Re: MTRX/DADMAN output to multiple Spkr Outputs simultaneously with same stereo sourc
Quote:
Although, I suppose, perhaps you have a set in the live room for band listening, RainbowStudio used to have a very nice pair of B&Ws for this.
__________________
https://lukehoward.com/ |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
MTRX DADman 5.4.4.2 & Firmware 2.3.2.1 | Johnny Hulst | Pro Tools | MTRX & MTRX Studio | 3 | 08-13-2021 06:41 AM |
MTRX/DADman and Core Audio Outputs for Web or Logic...Stereo & 7.1.4 | Funkster | Pro Tools | MTRX & MTRX Studio | 4 | 03-16-2021 09:50 AM |
how to listen in mono at a stereo source with DAD's MOM & Avid MTRX | Johnny Hulst | Pro Tools | MTRX & MTRX Studio | 2 | 07-01-2019 10:47 AM |
Sum and Intercancel between MTRX DADman and S6 | laki | Avid S4/S6 | 1 | 12-27-2017 04:18 PM |
how do I split stereo output to multiple stereo output pairs? | hokuspocus | Pro Tools TDM Systems (Mac) | 5 | 04-05-2002 07:34 AM |