PT9 on MBox 2 Pro footswitch won't start/stop playback anymore

[brentf]

I love the footswitch Playback Start/Stop function, and it worked flawlessly in all versions of PT8LE, DVTK, DVTK2

Since upgrading to PT9, CPTK2, the footswitch only punches in/out of record, regardless of the radio button selection in the "Setup/Hardware..." window.

I have checked several other threads relating to the footswitch on various interfaces, but saw nothing that addresses this behavior. I was hoping the 9.0.1 update might poke it... no luck.

My system: (the only thing new in my setup since the footswitch worked last is PT v9 w/CPTK2... clean install and Mac OSX 10.5, now 10.6)

PT 9.0.1
MBox 2 Pro latest driver per 9.0.1 instructions
MBox 2 Pro firmware version 2007-10-31 03:44:02 -0700
Mac OSX 10.6.6
Mac Pro quad core xeon 2.8
10GB RAM
Digi CoreAudio Manager 9.0.1

I'm going to boot into my partition with OSX10.5.8/PT 8LE and see if the footswitch works there like it did when I used that partition before moving over to 10.6/PT 9. I'll reply with my results.

UPDATE: The footswitch works correctly in my OSX 10.5.8/PT8LE partition. Playback start/stop is good. Coming back to 10.6.6/PT9.0.1 and no dice.

[brentf]

Sorry... I just realized I posted this in the pre- PT9 forum instead of the PT9 specific one. I was focused on 'MBox' Is there a way to move a post to a different forum?

[brentf]

Please don't reply here... I resubmitted the thread in the PT9 forum.

Thanks!