192 i/os not detected

[Howardk]

My system does not detect the 192 i/o interfaces (2). I have restarted and power cycled many times and checked all connections. I had this same problem when I first added my Accel card a few months ago. . . but after a number of restarts it finally found the interfaces. Not today.

Another strange things is DigiTest sees the cards as follows:
0 HD accel
1 HD Core
2 HD Process
3 HD Process

But they are physically in the slots in the order
HD Core
HD Accel
HD Process
HD Process

DigiTest passes all card. However when I look at the Slot info the the Core Card the secondary Peripheral Information -> Peripheral Family: says "Firmware Missing!" and the Primary peripheral says Firmware 0.0. I doubt anything from Digi is version 0.0.

The first 192 i/o is plugged into the HD core and the second jumpered to the first HD card.

The only thing I have changed today is my 21" CRT monitor was upgraded to a 20.5" Dell LCD.

WTF?

[Howardk]

OK, I deleted a bunch of DAE and ProTools preferences. . . the Interfaces are now detected and also show up in DigiTest with v3.0 firmware. . .

Very strange that this happened randomly. Also I still wonder what is going on with the order the cards show up in DigiTest.