ReVibe 1.1cs1 Update

[Avid]

ReVibe version 1.1cs1 for Pro Tools|HD Accel systems on Mac OS X and Windows XP is available for download from the following location in Support/Downloads:

http://www.digidesign.com/download/revibe/

What’s Fixed in ReVibe Version 1.1cs1 for Mac OS X and Windows XP?

Fixed: ReVibe does not register Ls and Rs channels on a surround mix (Item #59042)

• With certain ReVibe Reverb Types, Ls and Rs channels of a surround mix were not properly being fed to the reverb algorithm.
  The ReVibe Reverb Types that exhibit this problem are: Natural, Dense, Tight, and Wide

Who Should Use ReVibe 1.1cs1 for Mac OS X and Windows XP?

This update is recommended for the following ReVibe users only:

• Users working with surround mixes and who are using ReVibe to process rear channels.

Please note that because this is an interim "CS" (Customer Support) release, it will only be available from the Support section web page listed above. The official release versions of 1.1 for Mac and Windows will remain the official downloads in the Products section until these fixes have been fully qualified with the next official release of ReVibe.

[soundlife2]

Hey Guys,

I am getting an Error when attempting to Install this update. It reads as follows:

Error creating file.
1008:5, -5000 Access denied error

I have Admin priviledges and have not had this trouble in the past.

I'm at a loss ....

Thanks for your help.

[Avid]

Working here, just ran it again to be sure.
Make sure you are logged in as an administrator.

In System Preferences, choose Accounts,
then click on your Admin account
then click on Login Options
and if you are only one on that machine, check the box next to Automatically login...as your account name.

Reboot.

Another thing to check is that the installer is on your hard drive or desktop, and that you are trying to install it to your startup drive.

[soundlife2]

Everything is as you said it should be:

I am logged in as Admin.
I am automatically set up to Log In.

I am still receiving the same error.

Where is the Installer trying to write it's files? I'll have my IT engineer check my system permissions for for those areas.

Thanks again.

[DigiTechSupt]

Hi Phil,

Check the permissions on each folder in this path Mac HD>Library>Application Support>Digidesign>Plug-ins. The Library and Application support permissions should read:

Owner: System
Access: Read & Write

Group: Admin
Access: Read & Write

Others Read only

The Digidesign and Plug-ins folders should read:

Owner: (your user login name)
Access: Read & Write

Group: Admin
Access: Read & Write

Others Read & Write

You may also want to check the permissions of all non-boot drives in the system. Their permissions should be set like the Digidesign and Plug-in folders, and be sure "Ignore Ownership and Permissions" is deselected for all drives.

You could also try running the Repair Disk Permissions routine on the boot drive. This can be found in the OS X Disk Utility under the First Aid tab.

Regards,

Digidesign Technical Support

[soundlife2]

Hi Phil,

Check the permissions on each folder in this path Mac HD>Library>Application Support>Digidesign>Plug-ins. The Library and Application support permissions should read:

Owner: System
Access: Read & Write

Group: Admin
Access: Read & Write

Others Read only

The Digidesign and Plug-ins folders should read:

Owner: (your user login name)
Access: Read & Write

Group: Admin
Access: Read & Write

Others Read & Write

You may also want to check the permissions of all non-boot drives in the system. Their permissions should be set like the Digidesign and Plug-in folders, and be sure "Ignore Ownership and Permissions" is deselected for all drives.

You could also try running the Repair Disk Permissions routine on the boot drive. This can be found in the OS X Disk Utility under the First Aid tab.

Regards,

Digidesign Technical Support

Okay ...

I went over this with my IT Engineer. We Repaired Permissions, followed these permissions structures ... Restarted the machine ... Verified that the Permissions stuck ...

We still have the same Error Code. And this update is going to be important to me as I will be using Revibe heavily my next project that will then be PL2 encoded ... So any issues can cause rather unwanted results.

Anything else? What does that error code mean?

[soundlife2]

Hi Guys,

I just downloaded and Installed the new EQIII Plug-in. The main difference in the two is that the EQIII Installer came up with an Authenticator screen for my Admin password ... The Revibe Update does not. Is there any way to update the Revibe Installer so it performs the same type of installation as the EQIII Installer? That would solve the problem, I believe ...

Thanks for you help!

[DigiTechSupt]

This is a permissions error, here are some more things to try:

1. Download and install the latest interlock drivers from here, then unmount all drives except the boot drive and try installing again.

2. Download the update from our website again to rule out corruption in the installer.

3. Create a new Admin user account and try installing from that login.

4. If you've copied the updater to CD, try copying it to your desktop. This error could also be due to the location of the updater on your system.

Regards,

Digidesign Technical Support

[soundlife2]

I figured out the issue. For some reason, the Revibe Installer wants to be on the Desktop. To limit exposure to instability, our IT Dept. set our Desktops to "No Access". Once I changed this permission and ran the Installer from the Desktop, it installed just fine.

Thank you again for helping me work through this. I do appreciate it.

[K.I.]

The error goes out of Priset with the frog while playing backing and it
stops. Why
G5Dual2.5G&ACCEL7