|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
need help with a bcf2000
hi guys,
i just bought a behrinher bcf2000 controller but i cannot seem to get it to work. so i have a couple of questions... i searched the duc but with no luck... -how do i update the firmware of the bcf? -how do i setup the ams? -in all, whitch steps do i take to make it work?? any help would be very appreciated as i am completely new to the subject of controllers... thanx G4 dp 1,25 - digi 001 - PT 6.4cs9 |
#2
|
|||
|
|||
Re: need help with a bcf2000
ok, i got the firmware in the bcf now, but it still doesnt work...
|
#3
|
|||
|
|||
Re: need help with a bcf2000
Hi there!
First step update to firmware v1.07 and then turn off the bcf2000, next turn on the bcf2000 while holding down the top fith button from the left (under the rotary pot that has writen VAL 2) and the bcf will power up in bhui mode and then turn off again. Next download the legacy midi controlers here http://www.digidesign.com/download/controllers/ and copy the hui.dll personality file to C:\Program Files\Common Files\Digidesign\DAE\Controllers. Next launch protools go to setups-peripherals-midi controlers and then in Type choose hui, in recieve from and send to choose usbAudioDevice and in #Ch`s choose 8 and click ok! Next close protools turn on your bcf2000 wich will now always launch in bhui mode, launch protools, the words bhui on the bcf2000 should change to Pn open up a session and watch the faders go! In the firmware update folder you will find a pdf file with a description of the functions in hui mode just scroll down, its the last one, print the page and memorise all the functions! It realy is great |
#4
|
|||
|
|||
Re: need help with a bcf2000
thanx a lot !!
you are great !! |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
BCF2000? | Skyflash | Pro Tools M-Powered (Win) | 6 | 12-02-2005 11:36 AM |
PT7 does not run BCF2000 now? | DWAGS1 | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 2 | 11-15-2005 12:04 PM |
BCF2000 | p1tst0p | Pro Tools M-Powered (Mac) | 8 | 10-29-2005 05:22 PM |
BCF2000 | yavuzj | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 7 | 10-02-2005 09:31 AM |
BCF2000 not yet ... | Enric-BCN | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 6 | 07-15-2005 10:34 AM |