|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
192i/o won\'t switch to digital i/o ???
I had a session today at 44.1 and I couldn't get the 192 i/o to switch to to its digital i/o?
It was greyed out in the sends on the strips. I have the extra 8 analog inputs for the 192 and it just won't see digital inputs after using all 16 analog inputs. Does the 5.3.1 cs2 upgrade fix this? anybody? Thanks Daniel [img]images/icons/confused.gif[/img] |
#2
|
|||
|
|||
Re: 192i/o won\'t switch to digital i/o ???
As far as I know, you can only use 16 inputs. Either use 8 analog in & 8 digital ins or 16 analog ins. I could be wrong.
__________________
Bryan Jackson Independent Audio Systems Engineer Burbank,CA / Las Vegas, NV |
#3
|
|||
|
|||
Re: 192i/o won\'t switch to digital i/o ???
Yes, I understand that, but can't you choose which 16 you use at one time? I had a template made up to use 3 auxes at mix time, switch to digital i/o but no go. Thanks
Daniel |
#4
|
|||
|
|||
Re: 192i/o won\'t switch to digital i/o ???
Quote:
Try deactivating a couple of inputs and some digital options should show up. Also remember that if you plan to monitor through the same 192 that it will use two outputs which = 14 total inputs left.
__________________
Doug |
#5
|
|||
|
|||
Re: 192i/o won\'t switch to digital i/o ???
Actually you can use 18 inputs including one of the 2 channel digital options (AES or SPDIF).
You can go to the "Main" tab on hardware setup and select whether you are using analog or digital inputs on a channel by channel basis. You also have to select a digital format on the same tab as well as the Digital tab. Steve |
#6
|
|||
|
|||
Re: 192i/o won\'t switch to digital i/o ???
You can go to the "Main" tab on hardware setup and select whether you are using analog or digital inputs on a channel by channel basis.
You also have to select a digital format on the same tab as well as the Digital tab. Steve[/QB][/QUOTE] Steve, thanks for the info but I've tried this. This all started when I got the card with the 8 additional analog inputs, some projects switch and others don't. I'll go back a try again! What version of hd are you using? I'm on 5.3.1, from what I understand the 5.3.1 cs2 version doesn't apply to me.thanks daniel |
#7
|
|||
|
|||
Re: 192i/o won\'t switch to digital i/o ???
I have 5.3.1 HD2 with a 16 channel a/D 192i/o just like you.
Did you try trashing the digisetup files? Steve |
#8
|
|||
|
|||
Re: 192i/o won\'t switch to digital i/o ???
Quote:
None of the digital I/o works so I guess something is up, just hadn't the time to try this till now, I guess its broke [img]images/icons/confused.gif[/img] Daniel |
#9
|
|||
|
|||
Re: 192i/o won\'t switch to digital i/o ???
Go to i/o setup in Pro Tools and change them to digi there.
That should be it. |
#10
|
|||
|
|||
Re: 192i/o won\'t switch to digital i/o ???
Quote:
1-16 of the analog I/o for a send. It says <digihose n/a>. I have been using HD with the 192 and digital devices since June and sometimes it would not switch to digital I/o. since getting the additional 8 analog inputs the Digi I/o has been working less and less, and now not at all. I'll read the manual again, I shouldn't have to change the little matrix boxes in i/o do? I really don't want to take that new card out just to get the digital I/o to work again! [img]images/icons/confused.gif[/img] Thanks Daniel |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to do conections from Control 24 to LinxAurora 16 to 192i/o digital | Jorgi's | ICON & C|24 | 2 | 01-05-2015 01:16 PM |
how you conect a 192i/o digital to a control 24? | Jorgi's | Pro Tools TDM Systems (Mac) | 12 | 09-08-2010 08:51 PM |
24bit Abridge at the legacy port of an 192I/O digital | Alécio Costa | Pro Tools TDM Systems (Mac) | 43 | 09-08-2007 07:37 AM |
Digital 192i/o fan overkill ?????? | reader | Pro Tools TDM Systems (Mac) | 4 | 01-08-2005 01:52 PM |
Anyone switch to Digital Performer ? | Pop-cycle | General Discussion | 5 | 06-11-2004 08:35 AM |