2 BCF-2000 daisy chained

[amoretam]

I know, It's in the manual but it does not work for me..

First unit is in USB mode 4 - ID 1
Second unit is in Stand Alone mode 3 - ID 2

Connections:

1st unit MidiOut A to 2nd unit MidiIn
2nd unit Midi out B (tried with midiout A too) to 1st unit MidiIn

1st unit to usb port in the computer

Both units are in Baby hui mode..

Both units are working but they are doing exactly the same..
I mean, if I move faders in 1st unit the same faders move in the 2nd unit..They do exactly the same...

In peripherals I chose the only option I have to choose is
Type: Hui
Receive From: bcf 2000
Sent to: bcf 2000
# Ch's: 8

Midi led indicators in both units are flashing lnon stop...

Thanks a lot for support

[Emcha_audio]

that seems to be a question you should be asking the maker of that controller as it's not a problem with pro tools it self, as it works, but how to make one of the controller become the slave to the other (master)

[Lincoln Mitchell]

I have used two, but not daisy chained. Each connected via usb. When I did this the send and receive were diff midi ports, sounds like you have each controller on the same midi port? So yeah they would mirror.

I name the devices with unique ids in ams (Mac didn't see your Set up in your sig.) then route appropriately....

Hope this helps, sorry for the brevity, on my iPhone