Toggle Track Input on Control 24

[ajastudios]

Is there a way on the Control 24 to toggle the Track Input Monitoring on and off directly from the console.

I can place my mouse over the Green I on the GUI but was just curious to know if it was capable from the console?

[Gordon Hookailo]

Originally Posted by ajastudios

Is there a way on the Control 24 to toggle the Track Input Monitoring on and off directly from the console.

I can place my mouse over the Green I on the GUI but was just curious to know if it was capable from the console?

Yes! Hold down the CTL/CLUTCH modifier at the lower left while pressing the Monitor /phase button next to the ch bar display. It will start to blink, then the switches under the knobs will toggle the input status.

Cheers!