Recording and getting latency when play back the rec track

[willl3]

I'm running protools 7.3 with 002
when I play guitar and record it sound like everything is in time but when I play it back it sounds off
I did with a recording and with only a click track.

is there something where its taking in the live sounds sooner than it can out put the tracks?

Slipping everything is too much work!
Help!!
and thanks

[leadsticks]

...
is there something where its taking in the live sounds sooner than it can out put the tracks?

Slipping everything is too much work!
Help!!
and thanks

Yes, the buffer. Depending on the buffer settings you're using, the material gets recorded a little ahead. Check the required nudge values here (Buffer Settings and Latency Times):

http://music-production-school.com/p..._article.shtml

[willl3]

Where in protools do I find the latency set up for recording? thank you for the values

[GeoffLee]

Do you have any plugins on the master fader? Try disabling them, they could be making you hear the click and any other tracks 'late'.

[sbag]

do you have the low latency function on?

[albee1952]

If you are using an Mbox, read up on how to use the MIX knob and mute track you are recording to(yes, it still records).

[willl3]

No plugs in nothing
like i said

im playing with just the click in time but when I play back its off
where in protools do I control latency?

There is nothing except a click and a guitar

where is the low lentency control?

[sbag]

the latency funtion is in the part where you turn on the pre roll and etc. it the the last option
at the bottom. im not at the computer so i cant excatly tell you where it is.





hope this helps

[willl3]

No I don't have the low lantency on
when I play live to the click its on
when I play the recorded material back its off

Help!!!!!!!!!!

Please tell me where I can control this lantency problem someone else post where the pre and post are....... ok that doesn't help

I need to know where in protools LE 7.3 I go to fix a lantency problem

thanks

[JMS40]

Hmmmmm... wonder what you'd find if you looked up the word "latency" in the index of the Pro Tools Reference Guide...

Page 263 of the 7.3 manual discusses all the options available to you.