Avid Pro Audio Community

Avid Pro Audio Community

How to Join & Post  •  Community Terms of Use  •  Help Us Help You

Knowledge Base Search  •  Community Search  •  Learn & Support


Avid Home Page

Go Back   Avid Pro Audio Community > Legacy Products > 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac)

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 03-21-2002, 08:40 AM
Styles Bitchly Styles Bitchly is offline
Member
 
Join Date: Dec 2001
Location: Penthouse Suite
Posts: 388
Default Quick Time Question for Mr T. . .

Mr. T.,

I've searched some of your posts concerning quick time issues, and you seem to be the resident authority. I need some information if you would be so kind as to lend me some help.

I recently started working with quicktime - small 30 sec. & 60 sec. ad's - and I've noticed that it really chokes my performance while trying to score to the video. When I try to advance in the play window it takes about a second per frame (if I'm zoomed in to the point where I can actually see the frames and what's happening in them). I'm wondering if this is because I have only one hard drive. (?)

My system is a G4 733, Quicksilver, with a 40g ata, 7200 rpm. I'm assuming (although I know how dangerous assumptions can be) that reading video and audio from the same drive is choking my system. I have my buffer size set as high as possible, and I have about 400meg of ram allocated to PTLE use. So it appears I've got my system at its highest possible performance.

Do you feel it would increase my performance if I were to install another ata drive and dedicate it to video only? I've searched until my eyes hurt and can find nothing that pertains to ata drives and quicktime - perhaps I missed something in my fatigued state. Any information you can offer would be greatly appreciated.
__________________
Due to budget cuts the light at the end of the tunnel will be turned off until further notice.

http://www.gidakdigital.com
Reply With Quote
  #2  
Old 03-21-2002, 01:50 PM
fresler fresler is offline
Member
 
Join Date: Feb 2000
Location: Milano, Italy
Posts: 60
Default Re: Quick Time Question for Mr T. . .

Hi there,
first the good news: all you need to do is set the display of your video track from Frames to Block, this way everything is going to play out smoother. BTW if you need to zoom in on a frame, just togle or scrub through your quicktime movie and look at the actual movie window rather than the frames in the edit window. If you own a video editing card like Aurora Fuse or Pinnacle Miro DC30 you can actually watch your video on your TV, freeing up you computer's monitor.

To improve your performances having separate drives for audio and video is always the best option. I opted for 80 gigs ATA as secondary drive for audio, along with an 18 gigs SCSI that I mostly use for audio.
Last tip is to keep your video data rate to 800/1000 Ksec.

Good luck
__________________
Luca de Sensi
Reply With Quote
  #3  
Old 03-21-2002, 01:59 PM
Styles Bitchly Styles Bitchly is offline
Member
 
Join Date: Dec 2001
Location: Penthouse Suite
Posts: 388
Default Re: Quick Time Question for Mr T. . .

Sounds good to me. I thank you so much for the information. I'll be installing a new 60gb drive this evening, so I'll definitely try your advice.
__________________
Due to budget cuts the light at the end of the tunnel will be turned off until further notice.

http://www.gidakdigital.com
Reply With Quote
  #4  
Old 03-21-2002, 02:14 PM
Mr T Mr T is offline
Member
 
Join Date: Jul 2001
Location: Earth
Posts: 1,275
Default Re: Quick Time Question for Mr T. . .

Seems like someone was quicker than me...anyway here's my humble opinion:

"you seem to be the resident authority"

I wouldn't say that but...say it again?...
just kidding.


"When I try to advance in the play window it takes about a second per frame (if I'm zoomed in to the point where I can actually see the frames and what's happening in them). I'm wondering if this is because I have only one hard drive. (?)"

I don't really get your point...assuming that what you call the "play window" is the edit window, when you say "it takes about a second per frame" I hope you're not talking about the Video track...If you've read my posts on the subject, you're probably not, since I've said many times that this track is useless and known to slow processing in a drastic way. Use only the movie window, hide that stupid video track.

"My system is a G4 733, Quicksilver, with a 40g ata, 7200 rpm. I'm assuming (although I know how dangerous assumptions can be) that reading video and audio from the same drive is choking my system. I have my buffer size set as high as possible, and I have about 400meg of ram allocated to PTLE use. So it appears I've got my system at its highest possible performance".

It's not so much that it's choking your system...it's more a matter of drive access. When using the same drive for audio and video, your drive will quickly get fragmented thus giving you a crappy picture and slowing down of the general processing (audio+video). Also, your G4 will have to process both video and audio from the same drive which will be difficult given the IDE access speed.

"Do you feel it would increase my performance if I were to install another ata drive and dedicate it to video only? I've searched until my eyes hurt and can find nothing that pertains to ata drives and quicktime - perhaps I missed something in my fatigued state. Any information you can offer would be greatly appreciated".

Indeed, having dedicated-separated drives for audio and video will definitly help but that won't be enough. It also depends on what picture resolution you're using. I'm using iMovie to capture the movies delivered on DV. I choose the optimal setting in iMovie (full resolution or something like that...the highest setting). Then I open the resulting file in QT, resize the window (this is very important since a huge window will really slow down processing in PT and since you won't be able to resize the movie window once the movie is imported in PT->choose a size that allow you to work properly without the picture being too huge) and then export using Cinepack codec.
Let's be clear, the result in PT is not a full screen-great looking picture but I don't care, all I need is a reliable movie=>no sync problem ("sliding frames"), enough quality to be able to edit FXs or music...
Just in case you'll be considering SCSI, I've tried using SCSI drives along with Adaptec Ultrawide II card but got many "PCI too busy" messages, so I stick with IDE. Just my personnal experience, others will tell you SCSI works great.
One last advice: make sure to ask the people delivering the movie to put some black before the movie's starting point and after the movie's ending point. This will avoid a freezing picture at the end of the program (= hard to be sure where it really ends) and you'll also be sure where it starts...
Hope that helps.
__________________
Some music?... http://tmweb.free.fr
Reply With Quote
  #5  
Old 03-21-2002, 02:22 PM
Styles Bitchly Styles Bitchly is offline
Member
 
Join Date: Dec 2001
Location: Penthouse Suite
Posts: 388
Default Re: Quick Time Question for Mr T. . .

Thank you, Mr. T. I'm sure I probably did read your advice concerning the video track, but I haven't slept since last night, so I'm battling a lack of coherence. It's great to have so many people help, I thank you all.
__________________
Due to budget cuts the light at the end of the tunnel will be turned off until further notice.

http://www.gidakdigital.com
Reply With Quote
  #6  
Old 03-21-2002, 02:32 PM
Mr T Mr T is offline
Member
 
Join Date: Jul 2001
Location: Earth
Posts: 1,275
Default Re: Quick Time Question for Mr T. . .

You're welcome. As David-Kickin said in your other post, that's what we're here for. I'll help you if I can, somebody will help me if he can, and so on...Good luck and keep us posted.
__________________
Some music?... http://tmweb.free.fr
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Quick(Time) Question midi sordino Post - Surround - Video 1 09-23-2008 07:25 PM
Serato - Pitch N Time (Quick Question) jordan23 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) 3 09-19-2004 07:41 AM
Quick question: Time Limit? spicyitaliano 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) 14 03-10-2004 08:33 PM
Quick Time question Nostradumbass 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 0 02-03-2002 12:23 AM
2 part question - importing audio & Quick Time threepac Pro Tools TDM Systems (Mac) 2 12-15-2001 10:35 AM


All times are GMT -7. The time now is 01:46 AM.


Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com