Avid Pro Audio Community

Avid Pro Audio Community

How to Join & Post  •  Community Terms of Use  •  Help Us Help You

Knowledge Base Search  •  Community Search  •  Learn & Support


Avid Home Page

Go Back   Avid Pro Audio Community > Legacy Products > Pro Tools M-Powered (Win)

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 08-22-2006, 01:47 AM
Courvo Courvo is offline
Member
 
Join Date: Aug 2006
Location: Laaaaas Vegas!
Posts: 18
Default Speaker output

'Almost embarrassed to make this post, but I have been through the manuals, and can't find anything close to an answer.

I use M-Powered Pro-Tools 7.1, and my interface is the M-Audio Firewire Solo.

How do I route my output to studio monitors? All I get now is output through my headphones. 'Have checked the I/O settings in "Setup" menu, but only the FW>Solo shows for input and output.

Apologies for what I'm sure must be an elementary issue for all you pro's here.

Dave C. in Las Vegas
Reply With Quote
  #2  
Old 08-22-2006, 08:22 AM
cemastering cemastering is offline
Member
 
Join Date: Aug 2006
Posts: 20
Default Re: Speaker output

Hi Dave,

Are your studio monitors powered? If not, you'll need an amp to power them - then hook up the 'balanced line outputs' of your m-audio interface to the inputs of your amplifier. This should do the trick!

Make sure that Pro Tools knows to output the audio to the stereo out of your m-audio interface - it sounds like it does, as you have sound through your headphones.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
mbox 3 system output only right speaker e_man FireWire & USB Audio Interfaces (Mac) 1 02-19-2014 06:53 PM
Speaker Output weirdness Baritonealone 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) 1 07-29-2008 05:04 PM
Output from PTLE 6.4 to Mac speaker output AndyA1979 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) 4 04-29-2007 08:29 PM
Only getting output from the left speaker Bus 7-8 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 2 04-09-2004 07:00 PM
Speaker Output Level from the 001 box -- i have it maxed out..... peter parker 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) 4 11-21-2002 06:43 PM


All times are GMT -7. The time now is 12:41 PM.


Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com