[Cayce]

Just upgraded to 10.0, still using 002 rack. I've run into a problem where a signal coming into channels 5&6 show 6 to be about have the strength of 5 coming in. Both sides are equal coming from the source, but channel six input is weak. When I switch the inputs, the same thing happens, 5 is the weaker, so I know it's happening in either the 002 or in my software set up. What's even more odd is that when I test the same balanced stereo signal in channels 7&8, the opposite happens: it's 7 which is the weaker, by about half, than eight. With 5&6 it was the right side that was losing half the signal. With 7&8, it's the left.

When I apply the signal to channels 1&2 or 3&4, with the input gains balanced, the signals are balanced, as they should be. Weird.

I've checked my I/O setting and everything looks normal. Does this ring a bell for anyone? Any suggestions?

Thanks.

Cayce