View Single Post
  #6  
Old 11-25-2018, 02:59 AM
Sonogents Sonogents is offline
Member
 
Join Date: Dec 2015
Location: Lochristi, Belgium
Posts: 1
Default Re: S3 + Mackie Control or HUI

I tried using my S3 for Audiokinetic Wwise.

In MackieControl mode, I get following knobs and faders to work for each channel: fader, lower encoder, sel, solo, mute, "ín" (next to the lower encoder.)
However, only faders 1 and 9 respond to Wwise and they seem to respond to respond to the last active fader in the sofware of their group, i.e. if I have 11 faders in Wwise, fader 1 of the S3 would show the value of fader 8 in Wwise; fader 9 on the s3 would match fader 11 of Wwise, as if the midi channel is being ignored.
Also, faders and encoders are useless as they don't send out any linear values but raher some seemingly random values at the edges of the range.

HUI mode doesn't work at all. No buttons, faders or encoders are recognized and I get BSOD's all the time.
My AVID Transport isn't recognised at all, although it shows Wwise as the active app on it's display.


The software works perfectly fine with my digi003, so it's not an issue on the Wwise part.

Any thoughts or plans to make this work as advertised on the Avid side?
__________________
www.sonogents.com
Reply With Quote