Re: Mbox 2 - High pitched tone in bkgrd
Will do.
BTW - noticed, while working this aft, the 'tone' (sounds like a digital "whine" bad shield?) is also showing up on the output of the PC's native soundcard. Eveything stops when I quit Pro-Tools.
PC is an Athlon 64/Nvidia NForce 3/GForce if that helps. New install so all drivers are current.
Looking for a way to extend the supplied cable...a hub? Thought I read that passive hubs aren't supported.
Feeding Mbox 2 with an outboard mixer (alt 3/4 bus to Mbox input/Mbox output to fader and main mix for monitoring - not a feedback loop) Used the same setup with AM-III for years with fantastic results, trying to achieve the same with the Mbox 2. Need to keep the breakout box at the operators position rather than in the machine room for access to the mix fader on the breakout box.
Using this setup for voice-over and broadcast production.
|