Quote:
Originally Posted by remotedude
Greetings
We do this all the time using the HD MADI IO. We SRC to the incoming MADI signal from a Digico or other MADI source and clock the rest of the system to WC which is derived from a Brainstorm DCD8 receiving Video Black. Since the Profile won't take a video sync input ( I think ) then you would need to use a Black to WC box (DCD8, Big Ben). The only issues are the Digico MADI out. Digico uses channels above 56 for data communication. It's strange. But we've made it work and recorded from their sync reliably. Having said this we also have the DO SRC. Which we like better. It's easier to use in our applications.
Good luck ...... J
|
It sounds to me that you are getting away with this because your SRC is of the modern type that is resolving any issues with clocking, however, it might not work with other makes of SRC and for my own point of view, I would be unhappy to have two clocks running the system if for however small the chance, it could produce any possible conflict.
An alternative would be to take the video black into the system, and then distribute the clock forward to the digico. I still don't see why the Digico couldn't be set to 48khz, as far as I was aware they could work at both 96 and 48?