Quote:
Originally Posted by jd1234
So you are saying with digital input/output connections like ADAT or SPDIF on these interfaces you can connect to another preamp that holds say 8 channels or whatever it holds? So like this Twin Appollo 10 inputs. It has 2 input/mic analog iputs on the device itself and then the other 8 you can connect by using the SPDIF connector which connects to another preamp that has 8 channels? And thats the 10 total right there.
|
As I think I said pretty clearly, with ADAT, MADI, AVB, or DANTE etc. you can use multi-channel boxes to provide I/O to an interface that has one of those digital connections.
The Rosetta 800 you have already *is* an ADAT line level input and output box.
Like... a large range of products at many price points and capabilities. Preamps and/or line level, maybe with Mic DI, maybe remote control preamp gain, maybe multiple digital outputs, different sample rate support etc. etc.
https://vintageking.com/recording/co...el-adat-preamp
https://vintageking.com/audient-asp800
https://vintageking.com/heritage-aud...s-a-mic-preamp
https://vintageking.com/rme-12mic-pr...audio-networks (an example of a preamp box with multiple format support, ADAT, MADI or AVB, your choice but you pay $$$)
https://vintageking.com/rme-m-1610-pro-madi-network-i-o (an example of a line-level I/O box with multiple format support, ADAT, MADI or AVB, your choice but you pay $$$)
https://vintageking.com/neve-1073opx...te-card-bundle
Quote:
|
Also you mentioned the Rosetta200 kinda blows compared to newer converters. I don't doubt it. So you think it may be better to run the Neve1073 channel into whatever audio interface? So instead of going Neve107 => Rosetta => Interface, you are saying it may be better to go Neve1073 => Interface ?
|
I didn't say it blows, just that is may not be worth the effort to run as a outboard converter, esp. since it sounded like you are just using one channel of I/O with it.
As long as you have a decent interface and a spare analog line input you can just throw your mic preamp output into that.. or if you don't have enough line inputs again you can add a decent preamp/line in box on ADAT or MADI or whatever digital I/O connection if your interface has that... and again the Rosetta 800 is such a box if you have an interface with ADAT Input.