View Single Post
  #5  
Old 05-07-2021, 06:40 PM
basehead617 basehead617 is offline
Member
 
Join Date: Jan 2017
Location: California
Posts: 294
Default Re: Avid S6 on separate network?

Quote:
Originally Posted by creativecontrol View Post
Yes, it is best practices to isolate EUCON from other networks like Dante IP and LAN which may have higher traffic with file transfers.

There are several ways to approach this. You could keep the S6 / EUCON network separate on its own workstation NIC and still use the DHCP server from the Master Module, then have a router for AX32 Management + IP Audio for example. You could also have two independent routers - one of EUCON and one for Dante -> both connected to different NICs on the workstation. You could also setup VLANS for each of the different networking tasks within the room / facility.

While it is possible to simply dump all EUCON, DADman, Dante + file transfers onto the same network it is not recommended.

best,


Jeff
Sorry to hijack but on this same topic -- Jeff, if you have a single workstation - in this case a new Mac Pro with 2 GbE ports. If 1 GbE port is for internet and the 2nd one is to the S6 with the S6 acting as DHCP for that network and all the modules, that's a recommended/supported way of working right?
Reply With Quote