Re: Looper in the Effects Loop (setup) questions. Patch Changing...
Sorry. Actually that *will* work.
This is a little different than what you'd described in your other post. If you were using *just* the Eleven Rack, I'd stand by my advice to use its main outs. XLRs are electrically quieter and physically more robust than 1/4" connectors.
But using the Eleven Rack in the middle of a chain of stompboxes... that's different. Use the ER's guitar input and its amp output. Those are a perfect match to stompboxes.
The only remaining issue has to do with where you're going from the Boomerang's output. You have several alternatives:
1) The `Rang can drive your K12 through a 1/4" cable; no problem with impedance or levels. If you need to go to a stage box for the house, use the K12's through output.
2) If you want to straight to a stage box (as you might in the even that the venue provides a monitor that you're willing to use), use your DI between the `Rang and the stage box.
3) You could also use your DI between the `Rang and the K12, but it doesn't really buy you anything.
|