Quote:
Originally posted by Ozzie:
Go to i/o setup in Pro Tools and change them to digi there.
That should be it.
|
<font size="2" face="Verdana, Arial">Yes, I wish it were! I've been to hardware and also in I/o setup, you just click the interface selector buttons under I/o icon to change them right? The I/o settings are the same in both places and NONE of the digital I/o works.Not the spdif or aes on enclosure none.The fx units are receiving clock from the 192, but Protools mix window won't let me select anything other than
1-16 of the analog I/o for a send. It says <digihose n/a>.
I have been using HD with the 192 and digital devices since June and sometimes it would not switch to digital I/o. since getting the additional 8 analog inputs the Digi I/o has been working less and less, and now not at all.
I'll read the manual again, I shouldn't have to change the little matrix boxes in i/o do?
I really don't want to take that new card out just to get the digital I/o to work again!
[img]images/icons/confused.gif[/img]
Thanks
Daniel