Re: Is there a way to use a 7.2.4 Dolby Atmos home theater as a Pro Tools Dolby Atmos
Quote:
Originally Posted by LDS
The receiver itself probably isn't ideal, as it will include additional decoding and processes that will either adversely affect your mix... or not work at all. If your emotiva amp has line level inputs on it, you would just hang it off the appropriate audio interface just like you would any passive studio monitoring system with dedicated amplifier.
You will need to use Dolby Atmos Production or mastering suite, but neither of them output an encoded audio signal suitable for consumer atmos home cinema systems.
|
Trying to map this out in my head. Would I completely bypass the Marantz receiver (as it's not an interface) and have the speakers and subs connected to the amp then the amp connected to the interface then the interface connected to the computer? So in my case
MBP with Pro Tools Ultimate and Dolby Renderer > HD Native Thunderbolt > Mtrx Studio (or Focusrite Red 16Line) > amp > 11 speakers + 2 subwoofers?
Is that about right? What am I missing or getting confused and mixed up?
__________________
MacBook Pro Touch Bar (15-inch, 2016 2016), 2.9 GHz Intel Core i7, 16 GB 2133 MHz LPDDR3, Radeon Pro 460 4096 MB
Intel HD Graphics 530 1536 MB | macOS Monterey | Avid HD Native Thunderbolt | Avid HD Omni | Pro Tools Ultimate | Avid Artist Control | Avid Artist Mix
| Avid Artist Transport | Genelec 8351b Monitors | Genelec 7360A Subwoofer x2 | Slate Digital VMS Virtual Microphone
|