Quote:
Originally Posted by albee1952
First thing I would check is the Loop Sync cables. Make sure they are connected to create the correct path, and are fully seated(I have had one get loose and cause the same issue).
|
This.
BNC clocking cables are dirt cheap and even if you don't have spares you can use anything that has copper (like stripping a mic wire or anything) for short connections. There was one gig where I needed to use a twisted pair of a phone cable between two boxes (my bad, not enough spares) and it just works if the cable is not broken.
Half a meter overpriced Apogee Wyde Eye are just eating your money. Go to your local radioshack and ask for a dozen spares and I can guarantee an unused spare cable is better than 10-year old premium cable that has been connected and disconnected and coiled many times.