Re: Suggestions on which order interfaces should be connected
My setup is Dell laptop connected to external HD Native card. Native card is Digi- linked to HD IO on port 1, and Digi-linked to Focusrite Red4 on port 2. I clock HD IO to Red4 then to Hilo. HD IO is my clock source (internal). PT hardware shows “internal, 44.1”, and everything plays nice with each other. I use the Hilo for its converters/two bus and to a patch bay to use outboard gear. I route tracking signal into Hilo via ADAT. I send audio from Hilo to a Drawmer MC3.1 monitor controller via AES, then out to my monitors.
|