[Bob-E-Digital]

1. To set up the MPK25 in Pro Tools to trigger instrument or midi tracks there are
just a few steps to follow. First you must create an instrument or midi track within the
software. To do this go to Track>New and choose to create a new Instrument or Midi
Track.

2. Now from within the Edit Window you will see the instrument track but nothing is yet
assigned to it and there isn’t any apparent way to set an input or output. To make this
possible you must go to View> Edit Window and make sure there is a check next to
Instruments. This can also be done for the Mix Window.

3. Now we must choose the midi input so the device can be routed to this track. Now
usually if the device is connected and recognized before starting Pro Tools all 3 inputs
will be chosen automatically.
For the MPK25 you will see MPK25, MPK25 (2), and MPK25 (3). Sometimes
they will appear as their driver, USB Audio Device, USB Audio Device (2), and USB
Audio Device (3).
To do this go to Setup>Midi>Input Devices

4. After this is done you will have everything configured to start setting up different
instruments. To choose an instrument for the track you must first choose the midi input
for this track.

5. From here you must choose the first MPK25, or USB Audio Device input on All
Channels.

6. Now you must choose what plug-in you will be triggering via the Insert Menu to the right
of your instrument options. Click one of the arrows to drop down your options and go to
plug-in>Instrument to see a list of available plug-ins.

7. Next choose the midi output, or the instrument you will be using. To do this you click on
the Output Selector on the same track you chose the input and simply choose the plugin
instrument you would like to trigger.
You should be all set. Also, be sure to record enable the track before recording.